NV
V
ALPINAL® pipes with UNI TYT Ve joint DN80-300
CHOICE OF PRODUCT
Socket Pipes UNI TYTON with Weld Bead
COATING
Int - Cement mortar
Ext - ®BioZINALIUM + layer of blue acrylic
RANGE / MARK ®
® ALPINAL
PRODUCT FAMILY
PIPES
PIPES
SOCKETTED PIPES
SOCKETTED PIPES
Main features
See legend
Hide legend
Legend:
- DN: nominal diameter
- Lu: laying length, in m
- Class: pressure class according to EN 545 and ISO 2531
- e: nominal thickness according to ISO 2531, in mm
- ØDE: external nominal diameter of the barrel according to EN 545 and ISO 2531, in mm
- ØDI: internal nominal diameter of the socket, in mm
- P: nominal depth of the socket, in mm
- ØB: nominal diameter of the socket, in mm
- c: weld bead position, in mm
- Mass: total mass per metre (including cement coating and socket), determined with the nominal thickness, in kg/m
- PFA: allowable operating pressure, in bar NV When pipe is not anchored (only with gasket) V When pipe is anchored (with gasket and anchoring system)
- Reference: commercial reference Saint-Gobain PAM
Main characteristics:
- Internal lining : spun mortar cement
- External coating consists of : a layer of zinc-aluminium 85/15 alloy with a minimum surface density of 400g/m²), applied by spraying molten metal onto the surface of the iron, using an electric arc spray gun, from ZnAl (Cu) alloy wire and a protective layer of Aquacoat (semi-permeable), a water-based green acrylic of average thickness 80 microns applied using a spray gun
- The pipes are supplied with a plug at each end up to DN300 included
- Thickness of ductile iron adapted to the pressure
- Elastomer of quality EPDM
- Class : pressure class according to EN 545 and ISO 2531
Field of use:
- For connecting and water supply of snow guns
- Working networks under very high pressures
Associated products
- Angular deflection3
- ClassC100toC85
- DN80to300