Anchored solutions for the CLASSIC range - DN 700 to 1800

Anchoring solutions for the CLASSIC range - DN 700 to 1800

The CLASSIC ductile iron pipeline range comprises:

Pipes :
- With 200g/m2 external coating of pure zinc (99,99%) and a coat of varnish.
- With STANDARD joint, class C30 DN 700 to 1000, class C25 DN 1100 to 2000 .
- With UNIVERSAL Ve joint, class C30 DN 700 to 1000, class C25 DN 1200 to 1600.
- With PAMLOCK joint, class C25 DN 1400 to 2000.

Fitting :
- With EXPRESS, STANDARD, UNIVERSAL and PAMLOCK with epoxy coating deposited by cataphoresis or bituminous coating (in compliance with EN 545).
- With STANDARD, UNIVERSAL and PAMLOCK joints with epoxy powder or spray coating (in compliance with EN 14 901).

The CLASSIC range's durability is considerably greater than that of cast iron pipelines with only a 130 g/m2 zinc coating as prescribed by standard EN 545 owing to the thicker application of zinc at 200 g/m2.

The anchoring solutions for the CLASSIC range, DN 700 to 2000

UNIVERSAL Ve - for large diameters

For UNIVERSAL pipes and fittings, DN 700 to 1600.

PAMLOCK - for very large diameters

For UNIVERSAL pipes and fittings, DN 1400 to 2000.

STANDARD Ve - for large diameters

STANDARD Ve supplementary solution for STANDARD Ve pipes and fittings, DN 700 to 1200.

For aggressive situations, the following pipeline
systems :

TT PE or TT PUX for aggressive soils

Suitable for very corrosive soils or when there are stray currents (PE, polyethylene with diameter DN 700, in compliance with standard EN 14628, and PUX, polyurethane in compliance with standard EN 15189 with DN from 800 to 2000) (See standard EN 545 appendix D.2 to check when it is advisable to use this external coating).

PUR for aggressive water

Suitable to carry water that is aggressive to cement mortars (See standard EN 545 appendix E to check when it is advisable to use this internal lining).
The PUR solution has an internal polyurethane coating in accordance with standard EN 15655.

Technical specifications of CLASSIC range DN 700 to 2000

Important supplementary information

Angular deflection

Ensure compliance with the maximum angular deflection specified in the table, and note the angular deflection of anchored joints is generally slightly less than that of joints that are not anchored.

Fittings

The UNIVERSAL and PAMLOCK fittings ranges are not as extensive as the STANDARD joint ranges. All the possibilities offered by the STANDARD range can be obtained by combining UNIVERSAL or PAMLOCK fittings with flanged fittings.

Tee fittings

The pressure resistance of tees with tube diameters greater than DN 600 is lower than that of the pipes. Please consult us for further information.

Higher pressure

For pressures higher than those specified in the table, please consult us.