














Concentric Double Flanged Butterfly Valve Series S13 DN40-1200 PFA 16 bar - Sewage version
![]() |
General information
The concentric double flanged butterfly valves Series S13 have been designed, generally, for industrial applications where dimensional problems are important and where the disc needs to be protected.
The vulcanized sleeve system in the body avoids the risk of detachment / dislodgement of the sleeve body in the case of a valve position at the network edge. Their bolting design, on both sides, allows the dismantling of only one part of the installation while maintaining the other one under pressure and operational. They also facilitate the assemblies requiring a temporary isolation of some parts of the network in settlements such as pumping stations, warehouses, naval installations, etc.
Field of use
Different materials and coatings used for butterfly valves and liners can have a large response to many situations in the industrial area of sewage water.
It provides an effective and reliable solution in conditions of work as may be pumping stations, water treatment, desalination, irrigation, etc.
Range
Concentric double flanged butterfly valve Series S13 from DN40 to DN1200 (consult us for other diameters).
- Bodies: flanged type in ductile iron EN GJS-400-15 + epoxy powder 250 microns red (RAL 3009).
- Maximum working pressure:
- 16 bar
- PFA 25 bar up to DN300 (consult us for other diameters)
- Flange dimensions:
- PN10 and 16
- Consult us for PN25
- Discs:
- Ductile iron EN GJS-400-15 + Epoxy coating in black 250 microns
- CF8M Stainless Steel
- Contact us for other materials
- Sealing materials in the body type vulcanized nitrile. (please consult us for other types)
- Operation:
- Hand lever type MN : DN40-200mm
- Hand lever type MR : DN150-300mm
- Gear-box + handwheel : DN40-1200mm
- Motorized: - Electrical motor: Auma, Bernard, … - Pneumatic actuators, …
Given our wide range of materials, coatings and available drives, we remain at your disposal to look for a solution adapted to your requirements.
References
Codification
- Position 6 (disc) : A = St Steel CF8M, F = Ductile Iron + black epoxy
- Position 7 (actuator) : L = hand lever MN, U = hand lever MR, B = gearbox with handwheel, M = motorized
- Position 10 (Elastomer) : M = vulcanized nitrile, N = nitrile
C = distance between flanges
Concentric double flanged butterfly valve in ductile iron
Concentric double flanged butterfly valve in stainless steel
Added values
A) Bushings: They ensure alignment of the shafts as well as reducing the torque. Together with the shaft packing give additional safety preventing internal leakage and external contamination. B) Body design: The long-neck construction allows easy installation and provision for insulation, even if the valves are assembled between flanges. The top and bottom alignment lugs make mounting between DIN-ANSI-JIS, etc., flanges very easy. C) Spherical disc: The disc edge in contact with the seat is completely spherical providing smooth operation and considerable reduction of the valve torque. The combination of the valve tightness and reduced friction, especially around the shafts, gives a three folds increase in the life span of the seat D) Interchangeability: All valve components can be dismantled and the replaceable parts are interchangeable with concentric flanged butterfly valves. |
Compliance with standards
Company: designer and manufacturer works according to ISO 9001 by AENOR n° ES 0780 / 1997
Product: complies to the NF EN1074-1 and DVGW standards (up to DN700). Rest of the range in process.
Dimensions :
NF EN 593: Metallic butterfly valves
NF EN 558-1: Face to Face dimensions series 20
EN ISO 5752: Metal valves for flanged pipe network. Table 5 short series
API 609: Butterfly valves Flanged, Lugged and Wafer
NF EN 1092-2: Flange connections to the piping material
Materials: NF EN1503: Valves. Materials for bodies, bonnets and covers
Operation:
EN ISO 5210 : Multi-turn actuator to valve
EN ISO 5211 : Part-turn actuator to valve
Assembling between flanges: ISO PN10 or PN16, DIN 2632 PN10 or PN16, EN-1092 PN10 or PN16, NFE 29222 PN10 or PN16
Identification : EN ISO 5209: Marking
Hydraulic Tests:
EN ISO 5208: Pressure (Ratio A-No leakage)
EN 12 266-1: Sealing (Ratio A-No leakage)
In accordance with the German rules DVGW n° 6201CM0237.
Traceability
Traceability system for concentric double flanged butterfly valves allows since the departure from the factory to the last day of life of the valve to obtain information relating to the product origin and quality both of coatings and materials, manufacturing, inspection and hydraulic tests results.
From the moment the order is in the computer system, starts the program of manufacturing. A serial number is automatically assigned to this valve. Manufacturing sheet will be marked with this number. This sheet will contain all information about manufacture and inspection of the valve. At the end, two stickers with the number of identification will be placed in the body and in the top flange of the valve.
Assembling
The trial sheet assembly is identified with the internal number. This sheet has as many labels as valves to assemble. This label identifies the person responsible for the mounting and the possible problems during the assembling. The document contains the components of the valve if certification 3.1 is required by the customer.
Hydraulic tests
Label identifying the inspector and the results of the tests. Any remark produced during the tests and the torque is shown.
Foundry marking
Body and disc: manufacturer and type of material.
Marking (identification/labels)
Hydraulic characteristics
Headloss Δp inside the valve is expressed with the flow coefficient Kv which is the flow going through the valve at a temperature 20ºC and generating a headloss of 1 bar.
For the water we obtain the simplified calculation below:
Kv = Q ∆P
with Q in m³/h and Kv in m³/h, Δp in bar
Flow coefficient Kv (in m3/h) according to the opening angle of the disc:
DN | Degree of valve opening | |||||||
25 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | |
40 | 2.5 | 4.3 | 9 | 15 | 22 | 38 | 60 | 68 |
50 | 5 | 7.7 | 14 | 23 | 45 | 60 | 90 | 112 |
60-65 | 8.6 | 12.9 | 22 | 36 | 70 | 90 | 138 | 172 |
80 | 13 | 19 | 33 | 54 | 110 | 138 | 207 | 258 |
100 | 24 | 36 | 63 | 103 | 200 | 260 | 410 | 474 |
125 | 52 | 76 | 133 | 215 | 420 | 540 | 860 | 970 |
150 | 146 | 125 | 215 | 353 | 690 | 890 | 1420 | 1680 |
200 | 146 | 215 | 360 | 603 | 1120 | 1510 | 2350 | 2800 |
250 | 224 | 336 | 580 | 990 | 1850 | 3190 | 3700 | 4310 |
300 | 327 | 475 | 860 | 1380 | 2670 | 3490 | 5215 | 6465 |
350 | 430 | 645 | 1120 | 1896 | 3535 | 4395 | 6980 | 8620 |
400 | 560 | 775 | 1465 | 2285 | 4395 | 5600 | 9310 | 10775 |
450 | 775 | 1077 | 1980 | 3190 | 6120 | 7930 | 12700 | 15086 |
500 | 970 | 1380 | 2415 | 3965 | 7500 | 9900 | 15085 | 18965 |
600 | 1293 | 1895 | 3275 | 5260 | 10130 | 14225 | 20700 | 24137 |
700 | 1350 | 1990 | 3860 | 5980 | 10600 | 17100 | 25300 | 36000 |
800 | 1600 | 2200 | 4500 | 8200 | 12500 | 20000 | 29000 | 44000 |
900 | 1800 | 2300 | 6100 | 10400 | 17500 | 29000 | 42000 | 58000 |
1000 | 2500 | 3800 | 8700 | 13500 | 23000 | 37500 | 59200 | 80500 |
1100 | 4450 | 6350 | 10560 | 18210 | 28650 | 54560 | 72540 | 97586 |
1200 | 5400 | 7800 | 12500 | 22600 | 35500 | 61500 | 82000 | 110500 |
Mechanical characteristics
Necessary torque, in Nm, to close the disc at ΔP. These torques have been obtained with the standard range, water at 20°C and EPDM seats.
bar | DN | ||||||||||||||||||||
40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | |
3 | 5 | 5 | 15 | 17 | 22 | 39 | 48 | 90 | 126 | 161 | 245 | 520 | 590 | 840 | 1000 | 1650 | 2300 | 4700 | 6500 | 7000 | 8500 |
6 | 6 | 7 | 16 | 20 | 29 | 46 | 75 | 120 | 210 | 270 | 300 | 624 | 1120 | 1390 | 2200 | 3300 | 4600 | 6800 | 8500 | 9000 | 12000 |
10 | 9 | 13 | 20 | 23 | 42 | 72 | 90 | 140 | 270 | 390 | 500 | 897 | 1450 | 1800 | 3450 | 5000 | 6500 | 8500 | 11500 | 12000 | 15500 |
16 | 15 | 17 | 25 | 28 | 50 | 85 | 110 | 215 | 350 | 560 | 950 | 1400 | 1950 | 2500 | 3800 | 5860 | 9500 | 11500 | 15000 | 16000 | 22000 |
Materials and coatings
DN40-200
![]() |
Item | Designation | Material | Coating |
1 | Valve Body | Ductile Iron EN GJS-400-5 | Red Epoxy 250 µ (RAL 3009) |
2 | Bushing | Acetal « DELRIN » (POM) | - |
3 | O'ring | Nitrile | - |
4 | Upper shaft | Stainless Steel X20Cr13 according EN10088-3 | - |
5 | Seat | Nitrile | - |
6 | Disc | Ductile Iron EN GJS-400-15 | Black Epoxy 250 µ with ACS |
Stainless Steel CF8M | - | ||
7 | Lower shaft | Stainless Steel X20Cr13 according EN10088-3 | - |
8 | Retaining ring | Zinc plated steel | - |
9 | Circlip | Zinc plated steel | DIN 472 |
10 | Lower Plug | Nitrile | - |
11 | Bushing | Steel Bz | PTFE |
12 | Features TAG | Polyester | - |
DN250-500
![]() |
Item | Designation | Material | Coating |
1 | Valve Body | Ductile Iron EN GJS-400-15 | Red Epoxy 250 µ (RAL 3009) |
2 | Bushing | Steel Bz | PTFE |
3 | O'ring | Nitrile | - |
4 | Upper shaft | Stainless Steel X20Cr13 according EN10088-3 | - |
5 | Seat | Nitrile | - |
6 | Disc | Ductile Iron EN GJS-400-15 | Black Epoxy 250 µ |
Stainless Steel CF8M | - | ||
7 | Lower shaft | Stainless Steel X20Cr13 according EN10088-3 | - |
8 | Retaining ring | Zinc plated steel | - |
9 | Circlip | Zinc plated steel | DIN 472 |
10 | Lower Plug | Nitrile | - |
12 | Bushing | Steel BZ | PTFE |
13 | Features TAG | Polyester | - |
DN600-1200
![]() |
Item | Designation | Material | Coating |
1 | Valve Body | Ductile Iron EN GJS-400-15 | Red Epoxy 250 µ (RAL 3009) |
2 | Bushing | Steel Bz | PTFE |
3 | O'ring | Nitrile | - |
4 | Upper shaft | Stainless Steel X20Cr13 according EN10088-3 | - |
5 | Seat | Nitrile | - |
6 | Disc | Ductile Iron EN GJS-400-15 | Black Epoxy 250 µ |
Stainless Steel CF8M | - | ||
7 | Lower shaft | Stainless Steel X20Cr13 according EN10088-3 | - |
8 | Upper cover | Carbon steel | Black Epoxy powder |
9 | Bolt of upper cover | Zinc plated steel | DIN 472 |
10 | Lower cover | Zinc plated steel | - |
11 | Zegi ring Body | Zinc plated steel | - |
12 | Screw (DN800/1100) | Zinc plated steel | DIN 913 |
13 | Retaining ring shaft (only DN600/800) | Zinc plated steel | DIN 471 |
14 | Features TAG | Polyester | - |
Dimensions and mass
![]() |
DN | DN | General dimensions | |||||||||
A | B | C | D | E | F | G | H | L | Mass | ||
mm | inch | mm | mm | mm | mm | mm | mm | mm | mm | mm | kg |
40 | 1.5" | 110 | 75 | 106 | 150 | 30 | 11 | 90 | 215 | 10 | 7.33 |
50 | 2" | 120 | 82.5 | 108 | 165 | 30 | 11 | 90 | 232.5 | 10 | 8.42 |
65 | 2.5" | 135 | 92.5 | 112 | 185 | 30 | 11 | 90 | 257.5 | 10 | 9.50 |
80 | 3" | 141 | 100 | 114 | 200 | 30 | 11 | 90 | 271 | 10 | 10.70 |
100 | 4" | 165 | 114.5 | 127 | 229 | 30 | 11 | 90 | 309.5 | 10 | 13.10 |
125 | 5" | 180 | 127 | 140 | 254 | 33 | 14 | 90 | 340 | 10 | 18.69 |
150 | 6” | 193 | 143 | 140 | 285 | 33 | 14 | 90 | 369 | 12 | 20.75 |
200 | 8” | 225 | 172.5 | 152 | 343 | 33 | 17 | 90 | 430.5 | 12 | 33.40 |
250 | 10” | 282.5 | 210 | 165 | 406 | 23 | 22 | 130 | 515.5 | 14 | 48.80 |
300 | 12” | 308 | 243 | 178 | 483 | 23 | 22 | 130 | 573 | 14 | 71.90 |
350 | 14” | 338.5 | 282.5 | 190 | 533 | 31 | 22 | 160 | 637.5 | 15 | 93.40 |
400 | 16” | 380 | 308 | 216 | 597 | 31 | 27 | 160 | 719 | 18 | 122.00 |
450 | 18” | 380.5 | 340 | 222 | 640 | 38 | 36 | 190 | 758.5 | 20 | 172.60 |
500 | 20” | 432.5 | 380 | 229 | 715 | 38 | 36 | 210 | 850.5 | 20 | 207.00 |
600 | 24” | 494 | 440 | 267 | 840 | 80 | 60 | 210 | 1014 | 24 | 311.30 |
700 | 28" | 590 | 490 | 292 | 927 | 106 | 65 | 300 | 1186 | 30 | 448.30 |
750 | 30" | 590 | 530 | 318 | 985 | 106 | 80 | 300 | 1226 | 25 | 485.00 |
800 | 32" | 630 | 565 | 318 | 1060 | 106 | 80 | 300 | 1301 | 28 | 575.00 |
900 | 36" | 695 | 610 | 330 | 1178 | 110 | 80 | 350 | 1415 | 32 | 832.40 |
1000 | 40" | 770 | 675 | 410 | 1290 | 110 | 80 | 350 | 1555 | 32 | 972.60 |
1100 | 44" | 815 | 733 | 410 | 1405 | 110 | 80 | 350 | 1658 | 32 | 1485.60 |
1200 | 48" | 875 | 818 | 470 | 1510 | 110 | 100 | 350 | 1803 | 40 | 1806.00 |
Upper flange
![]() |
DN | Head of flange | ||||||||
mm | inch | ISO | P | E | F | S | T | Key | |
a x b | H | ||||||||
40 | 1.5” | F-07 | 13 | - | - | - | - | - | - |
50 | 2” | F-07 | 13 | - | - | - | - | - | - |
65 | 2.5” | F-07 | 13 | - | - | - | - | - | - |
80 | 3” | F-07 | 13 | - | - | - | - | - | - |
100 | 4” | F-07 | 13 | 30 | 11 | - | - | - | - |
125 | 5” | F-07 | 17 | 33 | 14 | - | - | - | - |
150 | 6” | F-07 | 17 | 33 | 14 | - | - | - | - |
200 | 8” | F-07 | 20.3 | 33 | 17 | - | - | - | - |
250 | 10” | F-10 | 26.2 | 23 | 22 | 3 | 70 | - | - |
300 | 12” | F-10 | 26.2 | 23 | 22 | 3 | 70 | - | - |
350 | 14” | F-10 | 28 | 31 | 22 | 3 | 70 | - | - |
400 | 16” | F-12 | 33 | 31 | 27 | 4 | 85 | - | - |
450 | 18” | F-14 | 48 | 38 | 36 | 4 | 100 | - | - |
500 | 20” | F-14 | 48 | 38 | 36 | 4 | 100 | - | - |
600 | 24” | F-16 | - | 80 | 60 | 5 | 130 | 18x11 | 7 |
700 | 28" | F-25 | - | 106 | 65 | 5 | 200 | 18x11 | 7 |
800 | 32" | F-25 | - | 106 | 80 | 5 | 200 | 22x14 | 9 |
900 | 36" | F-25 | - | 110 | 80 | 5 | 200 | 22x14 | 9 |
1000 | 40" | F-25 | - | 110 | 80 | 5 | 200 | 22x14 | 9 |
1100 | 44" | F-25 | - | 110 | 5 | 200 | 22x14 | 9 | |
1200 | 48" | F-30 | - | 110 | 100 | 5 | 230 | 28x16 | 10 |
Operating with MN and MR type hand lever
The operation by hand lever allows the disc to rotate between 0 and 90°. There are two types of manual control lever: the MN type and the MR type.
The MN type is the hand lever referenced for our range of Wafer, Lug and Flanged valves. The lever allows seven positions of the butterfly between 0° to 90° with an anchorage by spring.
The MR type is a 0° to 90° regulation hand lever. This product is not referenced in our range, please consult us.
![]() |
DN | Hand lever type MN | Hand lever type MR | |||||||||||||
mm | inch | C | D | E2 | H2 | Y2 | L2 | M2 | Mass | E3 | H3 | Y3 | L3 | M3 | Mass |
40 | 1.5” | 106 | 150 | 49 | 159 | 234 | 220 | 90 | 7.73 | 113 | 223 | 298 | 260 | 90 | 7.73 |
50 | 2” | 108 | 165 | 49 | 169 | 251.5 | 220 | 90 | 8.82 | 113 | 233 | 315.5 | 260 | 90 | 8.82 |
65 | 2.5” | 112 | 185 | 49 | 184 | 176.5 | 220 | 90 | 9.90 | 113 | 248 | 340.5 | 260 | 90 | 9.90 |
80 | 3” | 114 | 200 | 60 | 201 | 301 | 260 | 90 | 11.15 | 113 | 254 | 354 | 260 | 90 | 11.15 |
100 | 4” | 127 | 229 | 60 | 225 | 339.5 | 260 | 90 | 13.55 | 113 | 278 | 392.4 | 260 | 90 | 13.55 |
125 | 5” | 140 | 254 | 75 | 255 | 381 | 315 | 90 | 19.24 | 113 | 293 | 419.5 | 310 | 90 | 19.24 |
150 | 6” | 152 | 285 | 75 | 268 | 411 | 315 | 90 | 21.30 | 113 | 306 | 449 | 310 | 90 | 21.30 |
200 | 8" | 165 | 343 | 75 | 300 | 472.5 | 315 | 90 | 34.10 | 113 | 338 | 510.5 | 310 | 90 | 34.10 |
250 | 10” | 178 | 406 | - | - | - | - | - | - | 121 | 403.5 | 613.5 | 500 | 130 | 50.50 |
300 | 12” | 190 | 480 | - | - | - | - | - | - | 121 | 429 | 669 | 500 | 130 | 73.60 |
350 | 14” | 216 | 535 | - | - | - | - | - | - | 121 | 459.5 | 722.5 | 500 | 130 | 96.70 |
Manual operating with handwheel and gearbox MDV type
![]() |
DN | Gearbox type MDV with handwheel | |||||||||
mm | inch | C | D | E4 | H4 | Y4 | L4 | M4 | N | Mass |
40 | 1.5” | 106 | 150 | 125 | 198 | 273 | 129 | 43.5 | 50.5 | 102.95 |
50 | 2” | 108 | 165 | 125 | 208 | 290.5 | 129 | 43.5 | 50.5 | 107.85 |
65 | 2.5” | 112 | 185 | 125 | 223 | 315.5 | 129 | 43.5 | 50.5 | 124.21 |
80 | 3” | 114 | 200 | 125 | 229 | 329 | 129 | 43.5 | 50.5 | 129.60 |
100 | 4” | 127 | 229 | 125 | 253 | 367.5 | 129 | 43.5 | 50.5 | 141.78 |
125 | 5” | 140 | 254 | 160 | 285.5 | 412 | 135 | 43.5 | 50.5 | 191.20 |
150 | 6” | 152 | 285 | 160 | 298.5 | 441.5 | 135 | 43.5 | 50.5 | 251.09 |
200 | 8” | 165 | 343 | 200 | 355 | 527.5 | 152 | 52.5 | 57 | 293.24 |
250 | 10” | 178 | 406 | 250 | 442.5 | 652.5 | 222 | 61.2 | 70 | 422.38 |
300 | 12” | 190 | 480 | 250 | 468 | 708 | 222 | 61.2 | 70 | 615.00 |
350 | 14” | 216 | 535 | 250 | 498.5 | 761.5 | 222 | 61.2 | 70 | 852.56 |
400 | 16” | 216 | 597 | 300 | 572.5 | 880.5 | 278 | 69 | 72.5 | 1099.77 |
450 | 18” | 222 | 640 | 400 | 630.5 | 970.5 | 321 | 96.5 | 91.5 | 1712.78 |
500 | 20” | 229 | 715 | 400 | 682.5 | 1063 | 321 | 96.5 | 91.5 | 2056.62 |
600 | 24” | 267 | 840 | 500 | 798.5 | 1239 | 408 | 137.5 | 140 | 2608.29 |
700 | 28" | 292 | 927 | 600 | 944.5 | 1435 | 424 | 137.5 | 140 | 3875.70 |
750 | 30" | 318 | 985 | 600 | 944.5 | 1475 | 456 | 137.5 | 140 | 4640.13 |
800 | 32" | 318 | 1060 | 600 | 984.5 | 1550 | 456 | 137.5 | 140 | 5054.70 |
900 | 36" | 330 | 1170 | 700 | 1109 | 1719 | 510 | 180 | 156 | 7266.18 |
1000 | 40" | 410 | 1290 | 700 | 1184 | 1859 | 579 | 180 | 156 | 9638.01 |
1100 | 44" | 410 | 1405 | 700 | 1229 | 1962 | 579 | 180 | 156 | 11367.49 |
1200 | 48" | 470 | 1510 | 700 | 1310 | 2128 | 593 | 252 | 201 | 14362.75 |
Screwing Choice
![]() |
DN | E | PN10 | PN16 | ANSI 150 Lbs | |||||||||||||||
K | e | M | L | L1 | Number | K | e | M | L | L1 | Number | K | e | M | L | L1 | Number | ||
40 | 18 | 110 | 16 | M16 | 60 | 75 | 8 | 110 | 16 | M16 | 60 | 75 | 8 | 98.4 | 17.5 | W 1/2" | 55 | 70 | 8 |
50 | 18 | 125 | 18 | M16 | 60 | 75 | 8 | 125 | 18 | M16 | 60 | 75 | 8 | 120.6 | 19.0 | W 5/8" | 60 | 80 | 8 |
65 | 18 | 145 | 18 | M16 | 60 | 75 | 8 | 145 | 18 | M16 | 60 | 75 | 8 | 139.7 | 22.2 | W 5/8" | 65 | 80 | 8 |
80 | 20 | 160 | 20 | M16 | 65 | 80 | 16 | 160 | 20 | M16 | 65 | 80 | 16 | 152.4 | 23.8 | W 5/8" | 70 | 85 | 8 |
100 | 20 | 180 | 20 | M16 | 65 | 80 | 16 | 180 | 20 | M16 | 65 | 80 | 16 | 190.5 | 23.8 | W 5/8" | 70 | 85 | 16 |
125 | 22 | 210 | 22 | M16 | 70 | 85 | 16 | 210 | 22 | M16 | 70 | 85 | 16 | 215.9 | 23.8 | W 3/4" | 75 | 95 | 16 |
150 | 22 | 240 | 22 | M20 | 70 | 95 | 16 | 240 | 22 | M20 | 70 | 95 | 16 | 241.3 | 25.4 | W 3/4" | 75 | 100 | 16 |
200 | 23 | 295 | 24 | M20 | 75 | 95 | 16 | 295 | 24 | M20 | 75 | 95 | 16 | 298.5 | 28.6 | W 3/4" | 80 | 105 | 16 |
250 | 25 | 350 | 26 | M20 | 80 | 100 | 24 | 355 | 26 | M24 | 85 | 110 | 24 | 361.9 | 30.2 | W 7/8" | 90 | 110 | 24 |
300 | 28 | 400 | 26 | M20 | 80 | 105 | 24 | 410 | 28 | M24 | 90 | 115 | 24 | 431.8 | 31.7 | W 7/8" | 90 | 115 | 24 |
350 | 30 | 460 | 26 | M20 | 85 | 105 | 32 | 470 | 30 | M24 | 95 | 120 | 32 | 476.2 | 34.9 | W 1" | 100 | 130 | 24 |
400 | 32 | 515 | 26 | M24 | 90 | 115 | 32 | 525 | 32 | M27 | 100 | 130 | 32 | 539.7 | 36.5 | W 1" | 105 | 135 | 32 |
450 | 34 | 565 | 26 | M24 | 95 | 120 | 40 | 585 | 32 | M27 | 105 | 130 | 40 | 577.8 | 39.7 | W1.1/8" | 115 | 145 | 32 |
500 | 36 | 620 | 28 | M24 | 100 | 125 | 40 | 650 | 34 | M30 | 110 | 140 | 40 | 635.0 | 46.0 | W1.1/8" | 125 | 150 | 40 |
600 | 41 | 725 | 28 | M27 | 105 | 135 | 40 | 770 | 36 | M33 | 120 | 155 | 40 | 749.3 | 47.6 | W1.1/4" | 130 | 165 | 40 |
700 | 44 | 840 | 30 | M27 | 110 | 140 | 48 | 840 | 36 | M33 | 125 | 155 | 48 | 863.5 | 52.5 | W1.1/4" | 140 | 175 | 56 |
750 | 48 | 900 | 32 | M30 | 120 | 150 | 48 | 900 | 38 | M33 | 130 | 165 | 48 | 914.4 | 54 | W1.1/4" | 145 | 180 | 56 |
800 | 48 | 950 | 32 | M30 | 120 | 150 | 48 | 950 | 38 | M36 | 135 | 170 | 48 | 978 | 57 | W1.1/2" | 155 | 195 | 56 |
900 | 51 | 1050 | 34 | M30 | 125 | 160 | 56 | 1050 | 40 | M36 | 140 | 175 | 56 | 1086 | 60 | W1.1/2" | 165 | 200 | 65 |
1000 | 55 | 1160 | 34 | M33 | 135 | 165 | 56 | 1170 | 42 | M39 | 150 | 190 | 56 | 1200 | 63.5 | W1.1/2" | 170 | 210 | 72 |
1100 | 58 | 1270 | 38 | M33 | 145 | 180 | 64 | 1270 | 48 | M39 | 160 | 195 | 64 | 1314.5 | 101 | W1.1/2" | 210 | 250 | 80 |
1200 | 62 | 1380 | 38 | M36 | 150 | 185 | 65 | 1390 | 48 | M45 | 170 | 215 | 65 | 1422 | 108 | W1.1/2" | 220 | 260 | 88 |
Tapped holes for the flanges assembly will be :
- Metric for the PN standards
- Whitworth type for the NSI 150 standards0
For other tappings, consult us.
Packing
DN | Number of valves with hand lever per crate | ||
mm | DOUBLE FLANGE S13 | Crate dimensions | |
40 | 70 | 1200 x 800 x800 | |
50 | 70 | ||
65 | 60 | ||
80 | 55 | ||
100 | 50 | ||
125 | 35 | ||
150 | 35 | ||
200 | 25 | ||
250 | 7 | ||
300 | 7 |
DN | Number of valves with gearbox per crate | ||
mm | DOUBLE FLANGE S13 | Crate dimensions | |
40 | 50 | 1200 x 800 x800 | |
50 | 50 | ||
65 | 45 | ||
80 | 45 | ||
100 | 40 | ||
125 | 25 | ||
150 | 25 | ||
200 | 17 | ||
250 | 7 | ||
300 | 7 | ||
350 | 7 | ||
400 | 5 | ||
450 | 2 | 900 x 750 x600 | |
500 | 5 | ||
600 | 2 | 1150 x 900 x 800 | |
700 | 2 | 1200 x 1100 x 800 | |
800 | 2 | 1500 x 1200 x 500 | |
900 | 1 | 1500 x 1200 x 500 | |
1000 | 1 | 1600 x 1350 x 600 | |
1200 | 1 | 1950 x 1600 x 700 |