Elastomer Sleeve TT PE - Protection of joints of pipes and fittings DN60 to 300

1- Check the chamfer at the spigot end.

2 -Slide the sleeve onto the pipe’s spigot. If
necessary, use lubricant paste.

3- Socket the pipe and inspect the joint.

4- Fold back the sleeve.

5- Slide the sleeve over the socket to protect the
joint.

Elastomer Sleeve TT PE - Protection of joints of pipes and fittings DN60 to 300

PRODUCT FAMILY
JOINTS
JOINTS
ACCESSORIES
ACCESSORIES
JOINT / Component
Protection of joints
RANGE / MARK ®
® DIREXIONAL
Main features

Warning: in the case of pipes with anchored joints (Standard Vi, Universal Vi or Ve, Pamlock, Standard Ve) in salted area, the elastomer sleeve must be replaced by the heat-shrink collar.

Working with the TT PE range

1- Check the chamfer at the spigot end.

2 -Slide the sleeve onto the pipe’s spigot. If necessary, use lubricant paste.

3- Socket the pipe and inspect the joint.

4- Fold back the sleeve.

5- Slide the sleeve over the socket to protect the joint.