FH2 Underground Fire Hydrant DN80 BS750 - Type Loose Stopper - Da Costa/Barbados bayonet outlet
CHOICE OF PRODUCT
UFH ® EURO FH2
PRODUCT FAMILY
FIRE PROTECTION
FIRE PROTECTION
RANGE / MARK ®
Underground Fire Hydrant
Main features
Material and coatings
|
| Item | Designation | Material Standard version |
1 | Hydrant body | Ductile Iron coated with epoxy powder 250 microns |
2 | Cover | |
3 | Operating cap | |
4 | Washer | Cu |
5 | O-ring Ø20 | EPDM |
6 | O-ring Ø37 | EPDM |
7 | O-ring Ø70 | EPDM |
8 | O-ring Ø120 | EPDM |
9 | Piston | Ductile Iron |
10 | Cap | EPDM |
11 | Disc body | Ductile Iron |
12 | Pin | Stainless steel X20Cr13 |
13 | Screw M8x40 | Stainless steel A2-70 |
14 | Nigerian bayonet outlet | Ductile iron |
15 | Sealing nut | CW 614 N |
16 | Operating stem | Stainless steel X20Cr13 |
17 | Operating nut | CW 614 N |
18 | Rubberized disc | EPDM |
19 | Screw M12x30 | Stainless steel A2-70 |
20 | Washer | Stainless steel A2 |
21 | Screw pin M6x8 | Stainless steel A2 |
22 | Drain valve | Hostaform |
23 | Drain valve washer | EPDM |
24 | Drain valve spring | Stainless steel X2CrNi 18-8 |
25 | Drain valve washer | Nylon |
26 | Plastic cap | PE |
27 | Plastic cap | PE |
28 | Screw M12x35 | Stainless steel A2-70 |
29 | Brass ring | CW 614 N |
Technical characteristics
- Factory Test pressure: - Body: 25 bar (EN 12266 rate A – ISO 5208 rate A) - Shutter: 18 bar (EN 12266 rate A – ISO 5208 rate A)
- Coating: fusion bonded epoxy powder in accordance with UBA, WRAS
- Standard: BS 750 – EN 1074-6
- Maximum service temperature: 60° C
- Head losses in full open position: Kv = 96,4
- Operating turns: 8
- Operating cap: pyramidal to BS 750
- Flanges: BS EN 1092-2 ; BS 10 ; Table D and E 3” and 3.5”, ISO PN10/16
- Maximum allowable pressure (PFA): 16 bar
- Nozzle type: inlet flange Da Costa/Barbados bayonet outlet
- Size range: DN80
Solutions
Discreet underground fire hydrants offering a high level of safety
