



Fire hydrant ATLAS Traffic DN150 - Symmetric outlets
|
Material and coating
![]() |
Item | Designation | Material | Coating |
70 | Anti-sand filter | Brass (Cu Zn 30) | |
69 | Identification number | Aluminium | Anodic processing |
65 | Outlet joint 2“1/2 | Polyurethane | |
64 | 2 outlet joints 4“ | Polyurethane | |
61 | Symmetrical Outlet + plug 2“1/2 | Aluminium | |
60 | 2 Symmetrical Outlet + plug 4 “ | Aluminium | |
59 | 8 nuts HM 20 | Steel CL 8/8 | Zinc Bichromated |
58 | Fastener ring | Stainless steel Z 12 C 13 | |
57 | Joint between upper and lower body | Nitrile | |
56 | 4 screws CHC M 20 x 65 | Steel CL 8/8 | Zinc Bichromated |
55 | 2 half-flanges (body) | Ductile Iron EN GJS 400-15 or 500-7 en 1563 | Epoxy Powder + red Polyurethane |
53 | Support ring | Polyacetal | |
51 | Duckfoot bend | Ductile Iron 420-5 | Epoxy Powder |
50 | Joint cap/bonnet | EPDM Mousse | |
49 | Bonnet | Ductile Iron EN GJS 400-15 or 500-7 en 1563 | Epoxy Powder + red Polyurethane |
48 | Joint lid/body | Polyurethane | |
47 | Lid joint | Reinzoloid | |
46 | Couvercle Porte Vis | Ductile Iron 400-15 | Epoxy Powder |
45 | O’ring 19.8 x 3.6 | Nitrile | |
44 | O’ring 31.42 x 2.62 | Nitrile | |
43 | Joint Racleur V 24 | EPDM | |
42 | Porte Palier Vissé | Cu Zn 39 Pb 2 | |
41 | O’ ring 41.2 x 5.7 | EPDM | |
40 | Palier Supérieur | Polyacetal | |
39 | Operating stem | Z20 C13 | |
38 | Operating spindle | Steel XC 38 | Black Cataphoresis |
37 | Body : upper part | Ductile Iron EN GJS 400-15 or 500-7 en 1563 | Epoxy Powder + red Polyurethane |
36 | Body : lower part | Ductile Iron EN GJS 400-15 or 500-7 en 1563 | Epoxy Powder + red Polyurethane |
35 | 8 screws HM 20 x 70 | Steel CL 8/8 | Zinc Bichromated |
33 | 6 nuts HM 16 | Steel CL 8/8 | Zinc Bichromated |
32 | 6 screws HM 16 x 70 | Steel CL 8/8 | Zinc Bichromated |
31 | 3 Cales de Serrage | Ductile Iron EN GJS 400-15 or 500-7 en 1563 | Epoxy Powder + red Polyurethane |
29 | 2 Demi-Plaques de Trottoir | Ductile Iron EN GJS 400-15 or 500-7 en 1563 | Bituminous paint |
28 | Chain | Treated low carbon steel | |
27 | Washout tube DN 20 | PVC | |
26 | 4 Esses de Fixation | Z 12 C 13 Treated | |
25 | 2 half joints | EPDM | |
24 | 4 nuts Q M 10 | Steel CL 8/8 | Zinc Bichromated |
23 | 4 screws CHC M 10 x 30 | Steel CL 8/8 | Zinc Bichromated |
22 | 2 Adjustable junction box | Ductile Iron EN GJS 400-15 or 500-7 en 1563 | Bituminous paint |
21 | Joint Flange/Body | Nitrile | |
20 | Screw CHC M 8 x 25 | Steel CL 8/8 | Zinc Bichromated |
19 | Coquille de Manœuvre | Ductile Iron 400-15 | Dacromet +red Polyurethane |
18 | Bride Vissée Inférieure | Ductile Iron EN GJS 400-15 or 500-7 en 1563 | Epoxy Powder + red Polyurethane |
17 | Support Palier Inférieur | Ductile Iron EN GJS 400-15 or 500-7 en 1563 | Epoxy Powder |
16 | Porte Palier Vissé | Cu Zn 39 Pb 2 | |
15 | Joint diameter 210x155x3 | Joint Reinz AFM 39 | |
14 | Ensemble Butée à Billes | Stainless steel | |
13 | Rondelle d’Appui | Cu Zn 7 Pb 6 Zn 4 | |
12 | Screw Hm 8 x 8 | Stainless steel A2 -70 | |
11 | Anneau d’appui | Polyurethane | |
10 | Operating nut | Cu Zn 39 Pb 2 | |
09 | Operating screw | Z20 C13 | |
08 | Lower operating shaft | Steel TU 56-B | Galvanised |
07 | Tube Allonge | Ductile Iron 420-10 | Epoxy Powder |
06 | 2 Joints de Tube Allonge | Polyurethane | |
05 | Goupille à Sertir | Z20 C13 | |
04 | Gate fully covered with EPDM | Ductile Iron EN GJS 400-15 or 500-7 en 1563 | EPDM |
03 | Chemise | Cu Sn 6 Zn 4 Pb 2 | |
02 | Mobile half-flanges | Ductile Iron EN GJS 400-15 or 500-7 en 1563 | Epoxy Powder |
01 | Valve box | Ductile Iron EN GJS 400-15 or 500-7 en 1563 | Epoxy Powder |
Coating
Epoxy + red polyurethane 250 microns mini inside and outside for an excellent behavior against corrosion. A complementary coating on the air part enables him to resist the climatic requests: sun, the moon, bad weather, etc…
Reference of the repairing paint: 269081