



Straight valve box

Fire hydrant C9+ Traffic DN80-100 - Storz outlets
![]() |
|
Material and coating
![]() |
Item | Designation | Material | Coating |
1 | 1a -Operating cap | Ductile iron GS EN GJS 400-15 or 500-7 EN 1563 | Dacromet + grey Polyurethane 20 µm |
1c -Upper body | Ductile iron GS EN GJS 400-15 or 500-7 EN 1563 | Red-brown Epoxy powder 250 µm + red Polyurethane 40 µm | |
1f – Lower Body | Ductile iron GS EN GJS 400-15 or 500-7 EN 1563 | Epoxy powder 250 µm + red Polyurethane 40 µm | |
1 g – Screwed box | Ductile iron GS EN GJS 400-15 or 500-7 EN 1563 | Epoxy powder 250 µm + red Polyurethane 40 µm | |
1d-Extension tube | Ductile iron GS EN GJS 400-15 or 500-7 EN 1563 | Blue Epoxy powder 250 µm | |
1e -Valve box | Ductile iron GS EN GJS 400-15 or 500-7 EN 1563 | Blue Epoxy powder 250 µm | |
1b- Cover | Polyamide P A 6 | Red polyurethane paint | |
2 | Upper and lower bush | Brass type Cu Zn 39 Pb 2EN 12164 | |
3 | Operating stem | Steel type X20 Cr 13 EN 10088-3 | |
4 | Operating nut | Brass type Cu Zn 40 Pb 2 EN 12164 | |
5 | Fixing screw | Steel type CL 8/8 | Bichromated zinc |
6 | Operating rod | Steel type Tu 56 B NF EN 10240 | Galvanized |
7 | Valve | Ductile iron GS EN GJS 400-15 or 500-7 EN 1563 | Encapsulated EPDM |
8 | Outlets | Depending on models | |
9 | Operating shaft | X20 Cr 13 EN 10088-1 | |
10 | Pin | X20 Cr 13 EN 10088-1 | |
11 | Operating spindle | (OS) Forged steel C35 - NF EN 10083-1 | 25 microns black cataphoresis |
12 | Bolts and nuts | Steel type CL 8/8 | Bichromated zinc |
13 | Breakable traffic clamping shim | Ductile iron | 250 microns fusion bonded blue epoxy + red polyurethane |