Gully units SELECTA 500 and MAXI C250 - Implementation

Gully units SELECTA 500 and MAXI C250 - Implementation

RANGE / MARK ®
® SELECTA
MARKET / APPLICATION
Municipal Castings
PRODUCT FAMILY
GULLY GRATINGS
GULLY GRATINGS
CLASS EN124
C250 mini/Grp 3

The SELECTA 500 and SELECTA MAXI gully units are compatible with standardized kerbs of type T2, T3, T4, T5, A1 and A2 like with the gutters CS2, CS3 and CS4.

Bedding recommendations:

  • It’s advised to realize a formwork with interior dimensions of the concrete manhole or gully pot.
  • Lay a coat of sealing product (thickness min. about 30 mm).
  • Lay the frame on the sealing product and regulate its level (the SELECTA MAXI gully units enable to regulate the grating and the flagstone separately).
  • Finish the bedding by recovering completely the flange until the desired height (to take account of a possible coated type surfacing or other).

Important recommendations:

  • To clean the interior part of the frame (support zones of the grating and the flagstone) and in particular the zones in contact with the spring bars.
  • To lay the grating and the flagstone on the frame without detent. To wait the complete setting of the sealing product before to lock them in the frame.

Example of installation with a SELECTA 500 T-profile and A-profile

Example of installation with a SELECTA 500 T-profile and odour-tight inlets PAG n°2

Example of installation with a SELECTA 500 T-profile and mudpan

Compatible MUDPAN =

reference E4

Solutions

Curbside Collection

A broad range of gratings for rainwater collection
Due to the diversity of situations encountered, specific drainage methods are needed in order to optimise the collection of run-off rainwater. Saint-Gobain PAM offers a broad range of products to suit every situation.