House Connection Tube (3 layers)

House Connection Tube (3 layers)

PRODUCT FAMILY
PIPES
PIPES
House Connection Tube
House Connection Tube
SERVICE CONNECTIONS
SERVICE CONNECTIONS
CHOICE OF PRODUCT
HOUSE CONNECTION TUBES
RANGE / MARK ®
House Service Connection

Main characteristics

  • High density black polyethylene tube (PE 100) in accordance with NF EN 12 201 certified PAS1075 Type 3
  • Two waterproof leaves of aluminium
  • A blue outer protective coat with 4 green longitudinal triple stripes on the circumference (indication of reinforced protection of the tube). The coat is in Polypropylene PLUS, 30% more resistant than the old material in polypropylene reinforced with quartz
  • Benefit from a Certificate of Sanitary Conformity
  • Certified lifespan: 100 years

Field of use

  • Service Connection for potable water networks
  • Compatibility with ductile iron, bronze, brass or plastic fittings, valves and service accessories

(1) Ø outside: External Diameter of PE100RC tube;

(2) EN 12201 (NF T 54 063) SDR 11, Dn/thickness = 11

House Connection Tube

DN/ODLength of the tubeExternal Ø of rollerThickness of rollerTotal mass of rollerReferences
mmmmmmmkg
2550112018015.5173746
3250144020021.0173747
4050174025031.5173749
5050212028046.5173750

Adhesive Aluminium Sheet

DescriptionPackingReference
Adhesive Aluminium Sheet 50mm Length 50m1 piece173772

The aluminum adhesive sheet completes the anti-permeation protection at the junctions. After using the peeling tool, the RC100 PE pipe should be protected with this tape as shown in the image below:

Solutions