Legend:

DN: nominal diameter
Lu: laying length, in m
e: thickness according to EN598 + A1 – August 2009, in mm
er: thickness of the cement mortar, in mm
e1: external thickness of ZMU coating, in mm (cement mortar with acrylic fibers and resin)
ØDE: external nominal diameter of the barrel according to EN598 + A1 – August 2009, in mm
ØDI: internal nominal diameter of the socket, in mm
P: nominal depth of the socket, in mm
ØB: nominal diameter of the socket, in mm
c: weld bead position, in mm
Mass: total mass per meter (including cement coating and socket), determined with the nominal thickness, in kg/m
Reference: commercial reference Saint-Gobain PAM

Main characteristics:

External coating: a layer of zinc-aluminium alloy enriched with copper Zn85Al15 (Cu), with surface density of 400 g/m² covered with a protective red (RAL 3011) layer AQUACOAT 80 μm (mini average), without VOC and without BPA + grey cement mortar ZMU with polymeric additiv and reinforced with PE fibers
Internal lining: aluminous cement mortar CAL
Socket coating: zinc rich paint 40 μm or zinc-aluminium 200 g/m² + red AQUACOAT 160 μm (mini average)
Spigot coating: zinc-aluminium (Cu) 400 g/m² + red AQUACOAT 160 μm (mini average)
Standard Gasket in Nitrile, EN 681-1, WG type
EN 598 / CE Marking
Declaration of performances DoP-INTEGRAL005EN
Designed in accordance with applicable regulations: - NF EN 476: general stipulations regarding components used in systems - NF EN 752: design of sewerage projects - NF EN 1610: acceptance of structures

Separate sewer system and combined sewer system
Application: gravity flow and rising main sewerage systems
Type of effluent: domestic wastewater and rainwater
Perfectly watertight
For effluents between pH4 and pH12
Type of soils : traditional or trenchless pipe laying (DIREXIONAL)
For most of the soils, including rocky soils, those pipes can be laid with the native soils backfill.
Resistivity of the soils:

See products list

Solutions

Ductile iron pipes with special coating for withsatanding corrosion