Knife Gate Valve DN600-1200

Transversal gasket

Peripheral gasket

Flushing points

Knife Gate Valve DN600-1200

PRODUCT FAMILY
VALVES
VALVES
RANGE / MARK ®
KNIFE GATE VALVES
CHOICE OF PRODUCT
Manual type
Main features

The knife gate valve is a ON-OFF gate valve for mudded waters. Its bevelled rectangular shovel, sliding inside a body with a circular outlet as well as its tightness system WEY®, fit particularly well the transport of mudded fluids.

This valve is used for raw wastewaters, mud, water with sediments, in sewage works and sewage pipes under pressure.

Range

The knife gate valve is available from DN50 to DN1200 for a setting between flanges.

DNPFADrilling template
mmbar
600-12004ISO PN 10

For the other diameters refer to

RASRV28VAG700

and

RASRV28VAG800

Motorized version

Dimensional particularity for installation

The bolt holes ref. B are threaded.

The length of the bolts (B) must be adapted to the maximum screw depth on the valve, so that the gate is not blocked.

DNValve assemblyNb of bolts + nuts per valves (case C)
Nb of screwed bolt holes (case B)Nb of bolts per valve (case B)Maximum screw depthThreaded
60061232M 2714
70081635M 2716
80081646M 3016
900102040M 3018
1000102040M 3318
1200122450M 3620

Material and coating

Item

Designation

Material

Coating

1

Bevel gearbox with hand wheel

Epoxy power average thickness 75µm, grey colour

1b

Actuator Auma

Epoxy power average thickness 75µm, grey colour

2

Column

Steel

Epoxy power average thickness 75µm, grey colour

3

Body

Cast iron Ft 25

Epoxy power average thickness 175µm, grey colour

4

Screw

Steel Type Z13CF17

5

Operating nut

Bronze

6

Transversal gasket

Nitrile

7

Gate

Steel Type Z7CN18.09

8

Hemispherical Joint

Nitrile

Specificity

Transversal gasket

  • The transversal gasket is placed on both sides of the gate. This replaceable device prevents leakage along the gate, grants the valve a longer life.

Peripheral gasket

  • The peripheral gasket is O’ring type. It guarantees a smooth track for the gate and assuring the body and gate tightness.
  • The gate has a bevelled profile.

Flushing points

  • The shape of the body presents flushing points on the closing zone, producing a self cleaning effect and preventing the accumulation of fragments.
  • The full bore passage allows the use of all the pipe cleaning technics and provides minimal headloss.

Conformity to Standards

Dimensional

  • distance between flanges: - ISO 5752 - NF E 29305-1 - DIN 3202
  • drilling template of flanges: - ISO 7005 PN 10-16 - NF E 29206 - DIN 2532

Operating stem under frame, according to the regulation on personnel security.

Functional

  • tightness test on every valve to1.1 PFA according to: - ISO 5208 - NF E 29311 - DIN 3230 Part 3

Marking

A marking of foundry is present on the body. The indication PN10 or PN16 refers to the drilling template whereas PB 4 or PB 6 corresponds to PFA 4 or 6 bars.

An identification plate PAM S.A. indicates the type, the serial number, the DN as well as the PN.

Accessories

The gate valve can be equipped with a contactor that stops the flow.

Setting, servicing, maintenance

  • Assembly direction: place the bevelled part of the gate upstream.
  • The knife valve is integrated between flanges. Provide the self-restrained dismantling joint type PF and flange gaskets. Note: for the setting, see absolutely that screws respect the maximum screwing depth so as they do not block the gate.
  • During the use, it is possible to compress the superior transversal gasket thanks to side screws.