

To remove the lid of the PAVA


To install manipulating lid in the place like
below

To adjust the mobile body until its final or
provisional situation, it is necessary to use a
wrench.
PAVA 19 Surface box
RANGE / MARK ®
® PAVA
CHOICE OF PRODUCT
Type of prints
Type of prints
Type of prints
MARKET / APPLICATION
Municipal Castings
PRODUCT FAMILY
SURFACE BOXES
SURFACE BOXES
ACCESSORIES
ACCESSORIES
Main features
Main characteristics:
- Surface box with built-in extension.
- Side bonding ribs at the base of the body to prevent from rotation during levelling operation and a wide base reducing risk of subsidence under traffic.
- Easy levelling during the road resurfacing operations.
- Dedicated to specific operations requiring a large clear opening, in particular in gas networks.
Field of application:
- Product not subjected to standard EN 124-2.
- All zones requiring the access to a buried gate valve.
H1 | H2 | DI | A | C | B | D | Extension | Mass of cover | Total mass | Packaging |
mm | mm | mm | mm | mm | mm | mm | mm | kg | kg | |
192 | 222 | 145 | 300 | 282 | 162 | 216 | 140 | 2.3 | 21.40 | 25 |
Material and coating:
- Body, base and cover in Ductile Iron EN GJS 400-15: bituminous coating
- Seal in NBR
PAVA 19 kg
Adjustment using the manipulating lid for PAVA 19 Ref SAP: F3PVRC-T
To remove the lid of the PAVA
To install manipulating lid in the place like below
To remove the lid of the PAVA![]() | ![]() |
To install manipulating lid in the place like below![]() | To adjust the mobile body until its final or provisional situation, it is necessary to use a wrench.![]() |