
Sewerage Isolating Valves
Valves and hydrants
Sewerage valves
Sewerage valves complete the water cycle and are linked to the industry. A specialist in materials and coatings, our PAM solutions are tailored to customers’ requirements. For this reason, their sewerage valves can accept different types of fluids.
In the case of sewerage valves, the materials must be suitable for the aggressiveness of fluids and soil, and for suspended particles. The same principle of sectioning remains, but it must be suitable for sewerage.
In the case of sewerage valves, the materials must be suitable for the aggressiveness of fluids and soil, and for suspended particles. The same principle of sectioning remains, but it must be suitable for sewerage.
Sewerage gate valves
Just as for the transport of water, the PAM sewerage gate valve is the EURO 20®. Only the joints and screws change, being now composed of Nitrile and stainless steel to cope with aggressive fluids. Available in manual, motorizable, and motorized versions with diameters of between 40 and 300 mm.
- EURO 20® type 23 FSH sewerage
Penstocks
Made of stainless steel, PAM penstocks are of high quality. The range is available from DN 150 to 2000, with rising or non-rising intake. The penstock has a manual or motorized (electric and pneumatic) actuator. It can be made available during consultation for design calculation.
- Stainless steel penstock 316L with square hole
Knife gate valves
Our specific PAM knife gate valves suit all types of hydraulic applications and all types of fluids with suspended solids. They are available in rising or non-rising intake versions. They have manual or motorized (electric and pneumatic) actuators. Available in diameters between 50 and 2000 mm, they can be made available during consultation for design calculation.
- Knife gate valves
Flap valves
Made of stainless steel, our PAM flap valves are of high quality. They are available in three versions: round for wall mounting, round for flange mounting, or square ; or you can consult us for a design calculation.
- Stainless steel flap valves 304L
Associated products
- Closing directionClockwise
- DN40to300
- PN10to16
- DN65to400
- PN10to16
- A510to755
- DN65to300
- PN10to16
- A510to693
- DN1 1/2"to8"
- DN40to1200
- Mass2.1to1257.6
- DN1 1/2"to8"
- DN40to1000
- Mass-to744.0
Associated documents
Solutions
Sewerage Valves
Sewerage Valves
Completing the water cycle and linking to industry
Sewerage valves complete the water cycle, from its source to use by industry. A specialist in ductile iron materials and coatings, Saint-Gobain PAM has designed sewerage valves that can accept different types of fluids and thereby meet customers' specific requirements.