
Wafer Butterfly Valves
Ductile iron butterfly valves suitable for low pressure systems and all types of fluids
PAM WAFER range of ductile iron butterfly valves is assembled using rods and nuts. Installed above ground in order to reduce congestion, this valve is suitable for low pressure systems and all types of fluids. Any intervention on this product should be carried out when the network is not under pressure.
Available products
WAFER butterfly valve DN 40-1200 PFA 16 bar
AUMA three-phase motorised WAFER butterfly valve DN 40-1200
- DN1 1/2"to8"
- DN40to1200
- Mass2.1to1257.6
- DN1 1/2"to8"
- DN40to1200
- Mass2.1to1257.6
Wafer / Lugged Butterfly Valves
Short pattern ductile iron butterfly valves
The short pattern ISO 5752 series 20 ductile iron butterfly valves are concentric. The butterfly and the body are both made of strong and durable ductile cast iron with an epoxy powder coating. The joint is mounted in the body and the shaft runs through the disc. The PAM short pattern butterfly valves comply with standard EN 1074¬2.