Pass- und Ausbaustück

Installation of flanged equipment – dismantling joints, adjustable, self-anchoring

We manufacture a range of PAM dismantling joints in order to make the assembly and dismantling of valves easier.

With an adjustable length of wide stroke, they are products designed to simplify the installation dismantling of a flanged item in a network.
Due to their design, they allow an anchored connection and do not require the use of concrete thrust blocks.

Dismantling joints type JP and type PO for flanged valves

This dismantling joint, installed next to a flanged valve, will make easier its removal and reinstallation on to the network, while ensuring the mechanical strength continuity. These adaptable adjustable product lengths permit the bridging of gaps between two mating flanges.
It makes for easier installation of the gaskets between flanges including the metal reinforced gasket.
These dismantling joints are available from DN40 to DN2000 PFA 10, 16 and 25 bar.

Dismantling joint type PF for RAP without flanges

This dismantling joint installed next to a valve without-flanges and the self-restrained dismantling joint Type PF for butterfly valve without flanges allow the installation or removal of an equipment between two fixed flanges of a pipeline. The wide application sliding system reaches a 50 mm displacement to allow the installation and removal of the equipment.
DN50 to DN1200 PFA 10 and 16 bar.