RFLEX - Flange Adaptor Large Tolerance anchored

The RFLEX range of multi-material, wide tolerance flange adapters guarantees sealing and tensile strength on all types of cast iron/steel pipes and PVC/PE pipes from DN350 to DN1200 PN10 to PN16.

Very quick and easy to install, RFLEX allows independent adjustment of the locking and sealing mechanisms. 

The independently adjustable C40 hardened steel pads ensure locking. The gap left between the screw and the pad guarantees optimal positioning of the pad on the pipe surface when tightening. The specific shape of the teeth allows for clamping that guarantees high tear resistance. The shoe can be mounted and removed without damaging the coating. Depending on the DN, the possible angular deviation is ±2° or ±3°.

A RILSAN^®11-coated carbon steel retention and anti-disengagement ring located on the locking side increases tear resistance by guiding the pads and preventing them from rotating. It promotes better sealing by preventing the tie rods from rotating during tightening. It also protects the pads from external contamination.

The tie rods compress the seals to achieve a perfect seal. The seal is truncated conical, which ensures optimal positioning on the pipe while allowing a tolerance of up to 30 mm on the outside diameter.

The part is coated with RILSAN^®11, a high-performance biological polyamide made from castor beans. This coating offers an exceptional level of versatility, safety, durability, and resistance to permeation.

• DN350 – DN1200 (OD340mm to OD1270mm) **
• PN10, PN16 **
• Grey & ductile cast iron, Steel, Pressure PVC*, PE*
• Drinking water and raw water
• Carbon steel body coated with RILSAN^®11, thickness 250μ
• EPDM gasket (drinking water/raw water) or NBR gasket (wastewater)
• GEOMET or A2 stainless steel tie rods
• C40 GEOMET hardened steel locking pads
• Tolerance 30mm
• Angular deviation ±3° DN350-DN1000
• Angular deviation ±2° DN1100 and above
• Mechanical locking
• Hydraulic seal independent of mechanical locking

* Mandatory use of a reinforcement ring (CAN model)
 

** For other DN, PN, PFA, please contact us