RFLEX

RFLEX - Coupling Large Tolerance

Campo de aplicação

Peças de Montagem e Intervenção (PMI)

Família de produtos

Uniões (coupling) e montagem

DN350 – DN1200 (OD 340 mm to OD 1268 mm) **
PFA16 **
Grey & ductile cast iron, Steel, PVC pressure pipe, PE
Drinking water and raw water
Carbon steel body coated with RILSAN^®11, thickness 250μ
EPDM seal (drinking water/raw water) or NBR seal (wastewater)
GEOMET steel or A2 stainless steel tie rods (optional)
Tolerance of 24 to 30 mm depending on DN
Angular deviation ±3° DN350-DN700
Angular deviation ±2° DN800-DN900
Angular deviation ±1.5° DN1000 and above

** Other DN, PFA, please consult us

The RFLEX range of large tolerance, multi-material, non-locking sleeves guarantees a watertight seal on all types of cast iron/steel pipes and PVC/PE pipes from DN350 to DN1200 PFA16.

The tie rods compress the seals to achieve a perfect seal. The seal is truncated conical, which ensures optimal positioning on the pipe while allowing a tolerance of up to 24 mm (DN>600) or 30 mm (DN<600) on the outside diameter.

The part is coated with RILSAN®11, a high-performance biological polyamide made from castor beans. This coating offers an exceptional level of versatility, safety, durability, and resistance to permeation.

Concepção técnica

Características

Product description

1- Central body

Central part made of RILSAN^®11-coated carbon steel. The tapered ends ensure uniform compression of the seals without creep.

2- Compression ring

RILSAN^®11-coated carbon steel compression flange, which compresses the seal onto the pipe surface when the bolts are tightened.

3- Gasket
Truncated cone-shaped gasket that fits perfectly between the connector body and the pipe. It provides a complete seal and a tolerance of 24 or 30 mm on the pipe's OD.

4- Bolt holes

Round or square holes for housing the bolts.

5- Compression tie rods
Made of GEOMET-coated steel or stainless steel, they bring the two compression parts together and ensure the sleeve is sealed.