Through Bore-CE Fire Hydrant
Through Bore-CE Underground Fire Hydrant to BS 750:2012 and BS EN 14339 Certificate No. KM 31556. CE Marked in accordance with Construction Products
Directive; Certificate No. 0086-CPR-551050.
Technical information
- Clockwise close
- Weight 16 kg
- Maximum operating temperature 60ºC
- MOT 105 Nm
- MST 210 Nm
- Kv>92m3/hour – actual 245m3/hour
- Drainage system – time to drain 10 minutes
- Volume retained water 70ml
- Number of turns to
- start flow 2
- fully open 11
- Hydrant for potable water systems to BS
- EN 1074-6
- Resistance to disinfection to BS EN 1074-6
- Blue fusion bonded epoxy coating 250
- microns to WIS 4-52-01; WRAS approved
- Inlet flange suitable for connections to BS
- EN 1092-2 PN10/16 & BS 10 table D & E
- Stem seals and stem cap to BS750:2012
Options
- PN16 (standard)
- Bayonet outlet (UK or Dublin)
- N.I. Belfast outlet
Main features
- Kitemarked to BS750:2012, EN1074-1/2&6 and BS EN 14339
- Unobstructed 80mm full bore access when outlet cap removed
- Patented design
- Robust design with minimal maintenance requirements – safety factor of 2.6
- Automatic frost valve – no water escape during operation
- Secure bolted bonnet to enable easy maintenance
- Low weight compact design for ease of handling and installation
- Universal inlet flange
- Ductile iron corrosion resistant construction
- All non-metallic parts are in accordance with BS 6920-1; WRAS approved
- Fixed obturator to BS EN1074-6
- Stainless steel bolts (standard)
- 2½” London round thread stainless steel outlet (standard) to BS 750:2012
