Dismantling Joints Range
Installation of flanged equipment – dismantling joints, adjustable, self-anchoring
We manufacture a range of PAM dismantling joints in order to make the assembly and dismantling of valves easier.
With an adjustable length of wide stroke, they are products designed to simplify the installation dismantling of a flanged item in a network.
Due to their design, they allow an anchored connection and do not require the use of concrete thrust blocks.
Dismantling joints type JP and type PO for flanged valves
This dismantling joint, installed next to a flanged valve, will make easier its removal and reinstallation on to the network, while ensuring the mechanical strength continuity. These adaptable adjustable product lengths permit the bridging of gaps between two mating flanges.
It makes for easier installation of the gaskets between flanges including the metal reinforced gasket.
These dismantling joints are available from DN40 to DN2000 PFA 10, 16 and 25 bar.
Dismantling joint type PF for RAP without flanges
This dismantling joint installed next to a valve without-flanges and the self-restrained dismantling joint Type PF for butterfly valve without flanges allow the installation or removal of an equipment between two fixed flanges of a pipeline. The wide application sliding system reaches a 50 mm displacement to allow the installation and removal of the equipment.
DN50 to DN1200 PFA 10 and 16 bar.
- The self restrained dismantling joint JPL, (reduced number of tie bars compared to the standard version JP) allows installation in insertion or removal of an equipment between two fixed flanges of a pipeline.
- The sliding system can reach a +/- 20mm to +/- 40mm 50 mm displacement according to the DN.
- For this type of self restrained dismantling joint the locking of the valve to the pipeline is made by the tie bars and the gland.
- This piece is designed and manufactured in alimentary quality for potable water and irrigation.
- They have a mobile MALE PART and one fix FEMALE PART. Between these two parts there is an intermediate flange allowing a good closing and making a good seal in contact with seal joint.
,
Range
The self restrained dismantling joint JPL exist in a range from DN80 to 1200 PN10 and PN16, for pressure PFA10 - PFA16
Consult us for superior DN or other special supplies.
The self restrained dismantling joint Type JP allows the installation or removal of an equipment between two fixed flanges of a pipeline.
The sliding system can reach a 50 mm displacement to ease the removal of the equipment.
For this type of self restrained dismantling joint the locking of the valve to the pipeline is made by the tie bars and the gland.
This piece is designed and manufactured in alimentary quality for potable water.
They have a mobile MALE PART and one fix FEMALE PART.
Between these two parts there is an intermediate flange allowing a good closing and making a good seal in contact with seal joint.
Range
The self restrained dismantling joints Type JP exist in a range from DN40 to 1200, for pressure PFA10, PFA16 and PFA25.
The self restrained dismantling joint Type PO for flanged valves allow the installation or removal of an equipment between two fixed flanges of a pipeline.
The sliding system can reach a 50 mm displacement to ease the removal of the equipment.
For this type of self restrained dismantling joint the locking of the valve to the pipeline is made by the tie bars and the gland.
Range
The self restrained dismantling joint Type PO exist in a range stretching from DN40 to 2000, for pressure PFA10, PFA16 and PFA25.
The self restrained dismantling joint Type PO for flanged valves allow the installation or removal of an equipment between two fixed flanges of a pipeline.
The sliding system can reach a 50 mm displacement to ease the removal of the equipment.
For this type of self restrained dismantling joint the locking of the valve to the pipeline is made by the tie bars and the gland.
Range
The self restrained dismantling joint Type PO exist in a range stretching from DN40 to 2000, for pressure PFA10, PFA16 and PFA25.
The self-restrained dismantling joint FD type in ductile iron allows the installation or removal of equipment between two fixed flanges of a pipeline.
The sliding system can reach a 50 mm displacement to ease the removal of the equipment.
For this type of self-restrained dismantling joint the locking of the valve to the pipeline is made by the tie bars and the gland.
This piece is designed and manufactured in alimentary quality for potable water.
They have a mobile MALE PART and one fix FEMALE PART. Between these two parts there is an intermediate flange allowing a good closing and making a good seal in contact with seal joint.
Range
The self-restrained dismantling joints FD type in ductile iron exist in a range from DN50 to 600, for pressure PN10 and PN16.
The self restrained dismantling joint Type PA for flanged valves allow the installation or removal of equipment between two fixed flanges of a pipeline.
The short stroke sliding system reaches a 8 to 10 mm displacement depending on the DN. The displacement is obtained by taking away the adjustment ring.
For this type of self restrained dismantling joint the locking of the valve to the pipeline is made by the tie bars and the gland.
Range
The self restrained dismantling joint Type PA exists in a range from DN40 to 600, PFA10 or PFA16.
The self restrained dismantling joint Type PF for wafer type valves (without flanges) allow the installation or removal of an equipment between two fixed flanges of a pipeline.
The large stroke sliding system reachs a 50 mm displacement to permit installing and removing the equipment.
For this type of self restrained dismantling joint the locking system to the pipeline is made by the tie bars and the gland.
Range
The self restrained dismantling joint Type PF exists in a range from DN40 to 1200, PFA10 or PFA16.
