Gate Valves EURO 20 Range
Resilient seat gate valves are suitable for pipelines transporting drinking, raw or waste water with a temperature no higher than 60°C. The gate valves and the components that come into contact with drinking water comply with standard EN 1074-2 and the drinking water regulations of many countries respectively.
Composed of strong and durable ductile iron, resilient seat gate valves operate in two different ways:
- When fully opened: the gate completely frees the corresponding part of the valve’s body, allowing a passage of fluid; and
- When completely closed: the gate rests on its seat in the body of the gate valve, stopping the flow of fluid in the pipeline with total watertightness.
EURO 20 gate valve for comfortable handling and maximum safety
The EURO 20 ductile iron gate valve has a unique design and offers long-lasting service, comfortable handling and maximum safety through the autoclave system.
Coated with blue epoxy powder (250 microns), it conforms to the 2,500-cycle endurance test of standard EN 10742 and can be motorised.
Gate Valve short version Serie S14 according to ISO:
- In compliance with norm NF EN1074-1 and 2 at 2500 cycles and to NF standards
- French Sanitary conformity (ACS)
- 250 microns blue epoxy powder
- Manufacturing at SG PAM Toul Plant (France)
- Unit hydraulic tests in compliance with NF EN12266-1
- Range in CC and ACC version
Gate Valve long version Serie S15:
- In compliance with norm NF EN1074-1 and 2 at 2500 cycles and to NF standards
- French Sanitary conformity (ACS)
- 250 microns blue epoxy powder
- Manufacturing at SG PAM Toul Plant (France)
- Unit hydraulic tests in compliance with NF EN12266-1
- Range in CC and ACC version
The EURO 20 type 21:
- is composed of flanges with standard face to face dimensions (DN + 200 mm),
- version NG : DN65-300
- with ears from DN200
The EURO 20 type 21:
- is composed of flanges with standard face to face dimensions (DN + 200 mm),
- type NG : DN65-200
- with ears from DN200
The EURO 20 type 21:
- is composed of flanges with standard face to face dimensions
- type NG : DN65-300
The EURO 20 type 23:
- is composed of flanges with reduced face to face dimensions (0.4 DN+ 150mm),
- NG type: DN65-350
- with ears from DN200
The EURO 20 type 23:
- is composed of flanges with reduced face to face dimensions
- version NG : DN65-300
The EURO 20 type 25:
- is composed of a BE socket weld for cast iron pipe and two tyton watertightness gaskets
- type NG: DN80-200
The EURO 20 type 27:
- composed of a flanged spigot for ductile iron pipes
- type NG : DN65-150
Resistance: the bolt-free pressure seal autoclave gives the EURO 20 gate valve excellent resistance to corrosion.
Durability: the cold-forged stainless steel screw and gate with sliders improve its longevity by reducing friction.
Flexibility: the bearing can be replaced under pressure, and the EURO 20 gate valve remains efficient even when it has not been in operation for long periods of time.
Simple installation: this lightweight product range is ergonomic and easy to install, making it one of PAM’s leading ductile iron valve solutions.
Euro 20 New 3D presentation | Saint-Gobain PAM
New S15 DN 100 Euro 20 assembly.
Replacing the gate valve from a EURO 20 gate valve - Saint-Gobain PAM
More on EURO 20 gate valves : The EURO 20® gate valve has a unique design and offers ...
Replacing the bonnet gasket from an EURO 20 gate valve - Saint-Gobain PAM
More on EURO 20 gate valve : The EURO 20® gate valve has a unique design and offers ...
Replacing the screw and the stem nut from an EURO 20 gate valve - Saint-Gobain PAM
More on EURO 20 gate valve : The EURO 20® gate valve has a unique design and offers ...
Replacing the gasket from a BLUTOP EURO 20 gate valve - Saint-Gobain PAM
More on EURO 20 gate valves : The EURO 20® gate valve has a unique design and offers ...
