Accessory for ELANCIO
Technical design
| 169 | 321 | 314 | 0.89 | 215586 |
Features
Field of use
Restoration of the old PAM Pillar Fire Hydrant with ELANCIO cover.
HYDRO, non traffic, 1969-1982
H1 > 780 and < 940
or
H2 > 755 and < 915
To lay out the accessory (which can be cut) between the base of the cover and the ground.
For H1 > 940 or H2 > 915, an additional backfill under the accessory is necessary.
AJAX, non traffic, with square base, 1969-1982
H1 > 810 and < 970
ou
H2 > 755 and < 915
To lay out the accessory (which can be cut) between the base of the cover and the ground.
For H1 > 970 or H2 > 915, an additional backfill under the accessory is necessary.
TRI, non traffic, 1969-1982
H1 > 755 and < 915
To lay out the accessory (which can be cut) between the base of the cover and the ground.
For H1 > 915, an additional backfill under the accessory is necessary.
ATLAS, non traffic and traffic, without adjustment box
H1 > 755 and < 915
To lay out the accessory (which can be cut) between the base of the cover and the ground.
For H1 > 915, an additional backfill under the accessory is necessary.
Laying
Depending on the height of the ELANCIO cover with the ground level, H dimension, it will be possible to lay an accessory between the base of the cover and the ground.
According to H Either the accessory can be buried in the ground, Or it can be cut by section of 40 mm if the ground is very hard.
The accessory consists of 2 elements.Each element will be laid on each side of the body of the fire hydrant and then they will be joined together.
After assembly the accessory must be correctly oriented. The lower part of the cover must be laid on the corresponding shape on the accessory.
