Air Valve Triple Functions TYPE PP with quick anti-fill device - Threaded connection
The automatic triple-function air valve with 1" and 2" gas thread in glass fiber reinforced polypropylene has been designed to allow the release of air pockets accumulated in working conditions, the entrance of large volumes of air in case of pipe draining or bursts and to prevent pipeline damages coming from pressure transients, associated with high air outflow velocities.
Technical design
Technical design
| 1" (24/36) | PP | 80 | 167 | 92 | CH 41 | 0.3 | 293289 |
| 2" (50/60) | PP | 110 | 226 | 135 | CH 65 | 0.7 | 293290 |
Features
It can be fitted with the following options:
- EO: Air outlet only device when the air valve is located at points where the piezometric line may drop below the pipe profile, or for installations where air introduction must be avoided (suction pumps, syphon pipes).
- IO: High-flow air inlet and air exhaust flow regulation device.
Application
- Irrigation systems
- Water distribution networks
- Cooling systems, process and industrial installations
Main characteristics
- Single chamber body in glass fiber reinforced polypropylene PN16, provided with internal ribs for accurate guiding of the float.
- The aerodynamic full-bore body prevents premature closure of the moving assembly at high air intake and outlet velocities.
- Fitted with dynamic seals to prevent leaks at low pressures.
- Maintenance can be easily performed from the top without removing the air valve from the pipe.
- Compact and reliable structure whose parts are fully corrosion and chemical resistant. Lower maintenance
- Male BSPT or NPT threaded connection.
Technical data
Working conditions
- Fluid: drinking water, treated water, cooling water. Temperature range: 0°C … 60°C.
- Maximum pressure: 16 bar.
- Min. pressure: 0.3 bar, lower on request.
Standards
- Certified in compliance with EN-1074/4.
- ACS
- Male BSPT (standard) or NPT threaded connection to be specified at the time of ordering.
Operating principle - PP Version
Operating principle - IO Option PP Series
Material
| N° | Component | Standard Material | Option |
|---|---|---|---|
| 1 | Body | Glass fiber reinforced polypropylene | |
| 2 | Cap | Glass fiber reinforced polypropylene | |
| 3 | Float | Polypropylene | |
| 4 | Kinetic shutter | Glass fiber reinforced polypropylene | |
| 5 | O-ring | EPDM | |
| 6 | O-ring | EPDM | |
| 7 | O-ring | EPDM | |
| 6 | RFP plate with O-ring | Polypropylene | |
| 7 | Upper plate with nozzle | Polypropylene | |
| 8 | RFP Device | Stainless steel AISI 304 | PP-R series only |
| 9 | O-ring | EPDM | PP-R series only |
| 10 | IO Device | Polypropylene - 2" threaded fitting BSP | PP series (option) |
| 11 | EO Device | Polypropylene - 2" threaded fitting BSP | PP and PP-R series (option) |
The list of materials and components may be changed without notice.
Documents
Documents
9 results
