Photo_RAP_concentrique_brides_serie_13
RAP_concentrique_brides_serie_13-dim
Photo_RAP_concentrique_brides_serie_13
RAP_concentrique_brides_serie_13-dim
BUTTERFLY VALVES

Concentric Double Flanged Butterfly Valve Series S13 DN40-1200 PFA 16
bar

Product family
Valves

General information

The concentric double flanged butterfly valves Series S13 have been designed, generally, for industrial applications where dimensional problems are important and where the disc needs to be protected.

The vulcanized sleeve system in the body avoids the risk of detachment / dislodgement of the sleeve body in the case of a valve position at the network edge. Their bolting design, on both sides, allows the dismantling of only one part of the installation while maintaining the other one under pressure and operational. They also facilitate the assemblies requiring a temporary isolation of some parts of the network in settlements such as pumping stations, warehouses, naval installations, etc.

Field of use

Different materials and coatings used for butterfly valves and liners can have a large response to many situations in the industrial area of drinking water and other fluids as the raw water, sea water, etc.

It provides an effective and reliable solution in conditions of work as may be pumping stations, water treatment, desalination, irrigation, etc.

Range

Concentric double flanged butterfly valve from DN40 to DN1200 (consult us for other diameters).

,

  • Bodies: flanged type in ductile iron EN GJS-400-15 + epoxy powder 150 microns blue RAL 5005
  • Maximum working pressure:
    • 16 bar
    • PFA 25 bar up to DN300 (please consult us for other diameter)
  • Flange dimensions:
    • PN10 and 16
    • PN25 up to DN300 (please consult us for other diameter)
  • Discs:
    • Ductile iron EN GJS-400-15 + Epoxy coating in black 150 microns, with ACS certificate
    • CF8M Stainless Steel
    • Contact us for other materials
  • Sealing materials in the body type EPDM with ACS certificate. (please consult us for other types)
  • Operation:
    • Hand lever type MN : DN40-200mm
    • Hand lever type MR : DN150-300mm
    • Gear-box + handwheel : DN40-1200mm
    • Motorized: electrical motor (Auma, Bernard, …), pneumatic actuators, …

,

Given our wide range of materials, coatings and available drives, we remain at your disposal to look for a solution adapted to your requirements.

References

Codification

  • Position 6 (disc) : A = St Steel CF8M, F = Ductile Iron + black epoxy 150 µm
  • Position 7 (actuator) : L = hand lever MN, U = hand lever MR, B = gearbox with handwheel, M = motorized
  • Position 10 (Elastomer) : E=EPDM ACS, W=EPDM DVGW, V=EPDM vulcanized, T=EPDM HT, N=Nitrile, F=Viton

Technical design

RAP_concentrique_brides_serie_13-dim
40 1.5 10 16 Hand lever type MR Ductile iron 110 75 106 150 30 11 90 215 10 7.73 TBA40FUCWV
40 1.5 10 16 Hand lever type MN Ductile iron 110 75 106 150 30 11 90 215 10 7.93 TBA40FLCWV
40 1.5 10 16 Gearbox Ductile iron 110 75 106 150 30 11 90 215 10 8.53 TBA40FBCWV
50 2 10 16 Hand lever type MR Ductile iron 120 82.5 108 165 30 11 90 232.5 10 8.82 TBA50FUCWV
50 2 10 16 Hand lever type MN Ductile iron 120 82.5 108 165 30 11 90 232.5 10 9.02 TBA50FLCWV
50 2 10 16 Gearbox Ductile iron 120 82.5 108 165 30 11 90 232.5 10 9.62 TBA50FBCWV
65 2.5 10 16 Hand lever type MR Ductile iron 135 92.5 112 185 30 11 90 257.5 10 9.9 TBA65FUCWV
65 2.5 10 16 Hand lever type MN Ductile iron 135 92.5 112 185 30 11 90 257.5 10 10.1 TBA65FLCWV
65 2.5 10 16 Gearbox Ductile iron 135 92.5 112 185 30 11 90 257.5 10 10.7 TBA65FBCWV
80 3 10 16 Hand lever type MR Ductile iron 141 100 114 200 30 11 90 271 10 10.15 TBA80FUCWV
80 3 10 16 Hand lever type MN Ductile iron 141 100 114 200 30 11 90 271 10 11.3 TBA80FLCWV
80 3 10 16 Gearbox Ductile iron 141 100 114 200 30 11 90 271 10 11.9 TBA80FBCWV
100 4 10 16 Hand lever type MR Ductile iron 165 115.5 127 229 30 11 90 309.5 10 13.55 TBB10FUCWV
100 4 10 16 Hand lever type MN Ductile iron 165 114.5 127 229 30 11 90 309.5 10 13.55 TBB10FLCWV
100 4 10 16 Gearbox Ductile iron 165 114.5 127 229 30 11 90 309.5 10 14.3 TBB10FBCWV
125 5 10 16 Hand lever type MR Ductile iron 180 127 140 254 33 14 90 340 10 19.24 TBB12FUCWV
125 5 10 16 Hand lever type MN Ductile iron 180 127 140 254 33 14 90 340 10 19.4 TBB12FLCWV
125 5 10 16 Gearbox Ductile iron 180 127 140 254 33 14 90 340 10 20.09 TBB12FBCWV
150 6 10 16 Hand lever type MR Ductile iron 193 143 140 285 33 14 90 369 12 21.3 TBB15FUCWV
150 6 10 16 Hand lever type MN Ductile iron 193 143 140 285 33 14 90 369 12 21.4 TBB15FLCWV
150 6 10 16 Gearbox Ductile iron 193 143 140 285 33 14 90 369 12 22.15 TBB15FBCWV
200 8 10 Hand lever type MR Ductile iron 225 172.5 152 343 33 17 90 430.5 12 34.1 TBB20FUBWV
200 8 16 Hand lever type MR Ductile iron 225 172.5 152 343 33 17 90 430.5 12 34.1 TBB20FUAWV
200 8 10 Gearbox Ductile iron 225 172.5 152 343 33 17 90 430.5 12 36 TBB20FBBWV
200 8 16 Gearbox Ductile iron 225 172.5 152 343 33 17 90 430.5 12 36 TBB20FBAWV
250 10 10 Hand lever type MR Ductile iron 282.5 210 165 406 23 22 130 515.5 14 50.5 TBB25FUBWV
250 10 16 Hand lever type MR Ductile iron 282.5 210 165 406 23 22 130 515.5 14 50.5 TBB25FUAWV
250 10 10 Gearbox Ductile iron 282.5 210 165 406 23 22 130 515.5 14 52.3 TBB25FBBWV
250 10 16 Gearbox Ductile iron 282.5 210 165 406 23 22 130 515.5 14 52.3 TBB25FBAWV
300 12 10 Hand lever type MR Ductile iron 308 243 178 483 23 22 130 573 14 73.6 TBB30FUBWV
300 12 16 Hand lever type MR Ductile iron 308 243 178 483 23 22 130 573 14 73.6 TBB30FUAWV
300 12 10 Gearbox Ductile iron 308 243 178 483 23 22 130 573 14 75.4 TBB30FBBWV
300 12 16 Gearbox Ductile iron 308 243 178 483 23 22 130 573 14 75.4 TBB30FBAWV
350 14 10 Gearbox Ductile iron 338.5 282.5 190 533 31 22 160 637.5 15 96.9 TBB35FBBWV
350 14 16 Gearbox Ductile iron 338.5 282.5 190 533 31 22 160 637.5 15 96.9 TBB35FBAWV
400 16 10 Gearbox Ductile iron 380 308 216 597 31 27 160 719 18 130.9 TBB40FBBWV
400 16 16 Gearbox Ductile iron 380 308 216 597 31 27 160 719 18 130.9 TBB40FBAWV
450 18 10 Gearbox Ductile iron 380.5 340 222 640 38 36 190 758.5 20 191 TBB45FBBWV
450 18 16 Gearbox Ductile iron 380.5 340 222 640 38 36 190 758.5 20 191 TBB45FBAWV
500 20 10 Gearbox Ductile iron 432.5 380 229 715 38 36 210 850.5 20 225.4 TBB50FBBWV
500 20 16 Gearbox Ductile iron 432.5 380 229 715 38 36 210 850.5 20 225.4 TBB50FBAWV
600 24 10 Gearbox Ductile iron 494 440 267 840 80 60 210 1014 24 345.5 TBB60FBBWV
600 24 16 Gearbox Ductile iron 494 440 267 840 80 60 210 1014 24 345.5 TBB60FBAWV
700 28 10 Gearbox Ductile iron 590 490 292 927 106 65 300 1186 30 489.3 TBB70FBBWV
700 28 16 Gearbox Ductile iron 590 490 292 927 106 65 300 1186 30 489.3 TBB70FBAWV
750 30 10 Gearbox Ductile iron 590 530 318 985 106 80 300 1226 25 526 TBB75FBBWV
750 30 16 Gearbox Ductile iron 590 530 318 985 106 80 300 1226 25 526 TBB75FBAWV
800 32 10 Gearbox Ductile iron 630 565 318 1060 106 80 300 1301 28 635.6 TBB80FBBWV
800 32 16 Gearbox Ductile iron 630 565 318 1060 106 80 300 1301 28 635.6 TBB80FBAWV
900 36 10 Gearbox Ductile iron 695 610 330 1178 110 80 350 1415 32 893 TBB90FBBWV
900 36 16 Gearbox Ductile iron 695 610 330 1178 110 80 350 1415 32 893 TBB90FBAWV
1000 40 16 Gearbox Ductile iron 770 675 410 1290 110 80 350 1555 32 1039 TBC10FBAWV
1100 44 10 Gearbox Ductile iron 815 733 410 1405 110 80 350 1658 32 1681 TBC11FBBWV
1100 44 16 Gearbox Ductile iron 815 733 410 1405 110 80 350 1658 32 1681 TBC11FBAWV
1200 48 10 Gearbox Ductile iron 875 818 470 1510 110 100 350 1803 40 2002 TBC12FBBWV
1200 48 16 Gearbox Ductile iron 875 818 470 1510 110 100 350 1803 40 2002 TBC12FBAWV
40 1.5 10 16 Hand lever type MR Stainless steel 110 75 106 150 30 11 90 215 10 7.73 TBA40AUCWV
40 1.5 10 16 Hand lever type MN Stainless steel 110 75 106 150 30 11 90 215 10 7.93 TBA40ALCWV
40 1.5 10 16 Gearbox Stainless steel 110 75 106 150 30 11 90 215 10 8.53 TBA40ABCWV
50 2 10 16 Hand lever type MR Stainless steel 120 82.5 108 165 30 11 90 232.5 10 8.82 TBA50AUCWV
50 2 10 16 Hand lever type MN Stainless steel 120 82.5 108 165 30 11 90 232.5 10 9.02 TBA50ALCWV
50 2 10 16 Gearbox Stainless steel 120 82.5 108 165 30 11 90 232.5 10 9.62 TBA50ABCWV
65 2.5 10 16 Hand lever type MR Stainless steel 135 92.5 112 185 30 11 90 257.5 10 9.9 TBA65AUCWV
65 2.5 10 16 Hand lever type MN Stainless steel 135 92.5 112 185 30 11 90 257.5 10 10.1 TBA65ALCWV
65 2.5 10 16 Gearbox Stainless steel 135 92.5 112 185 30 11 90 257.5 10 10.7 TBA65ABCWV
80 3 10 16 Hand lever type MR Stainless steel 141 100 114 200 30 11 90 271 10 10.15 TBA80AUCWV
80 3 10 16 Hand lever type MN Stainless steel 141 100 114 200 30 11 90 271 10 11.3 TBA80ALCWV
80 3 10 16 Gearbox Stainless steel 141 100 114 200 30 11 90 271 10 11.9 TBA80ABCWV
100 4 10 16 Hand lever type MR Stainless steel 165 114.5 127 229 30 11 90 309.5 10 13.55 TBB10AUCWV
100 4 10 16 Hand lever type MN Stainless steel 165 114.5 127 229 30 11 90 309.5 10 13.7 TBB10ALCWV
100 4 10 16 Gearbox Stainless steel 165 114.5 127 229 30 11 90 309.5 10 14.3 TBB10ABCWV
125 5 10 16 Hand lever type MR Stainless steel 180 127 140 254 33 14 90 340 10 19.24 TBB12AUCWV
125 5 10 16 Hand lever type MN Stainless steel 180 127 140 254 33 14 90 340 10 19.4 TBB12ALCWV
125 5 10 16 Gearbox Stainless steel 180 127 140 254 33 14 90 340 10 20.09 TBB12ABCWV
150 6 10 16 Hand lever type MR Stainless steel 193 143 140 285 33 14 90 369 12 21.3 TBB15AUCWV
150 6 10 16 Hand lever type MN Stainless steel 193 143 140 285 33 14 90 369 12 21.4 TBB15ALCWV
150 6 10 16 Gearbox Stainless steel 193 143 140 285 33 14 90 369 12 22.15 TBB15ABCWV
200 8 16 Hand lever type MR Stainless steel 225 172.5 152 343 33 17 90 430.5 12 34.1 TBB20AUAWV
200 8 10 Gearbox Stainless steel 225 172.5 152 343 33 17 90 430.5 12 36 TBB20ABBWV
200 8 16 Gearbox Stainless steel 225 172.5 152 343 33 17 90 430.5 12 36 TBB20ABAWV
250 10 16 Hand lever type MR Stainless steel 282.5 210 165 406 23 22 130 515.5 14 50.5 TBB25AUAWV
250 10 10 Gearbox Stainless steel 282.5 210 165 406 23 22 130 515.5 14 52.3 TBB25ABBWV
250 10 16 Gearbox Stainless steel 282.5 210 165 406 23 22 130 515.5 14 52.3 TBB25ABAWV
300 12 16 Hand lever type MR Stainless steel 308 243 178 483 23 22 130 573 14 73.6 TBB30AUAWV
300 12 10 Gearbox Stainless steel 308 243 178 483 23 22 130 573 14 75.4 TBB30ABBWV
300 12 16 Gearbox Stainless steel 308 243 178 483 23 22 130 573 14 75.4 TBB30ABAWV
350 14 10 Gearbox Stainless steel 338.5 282.5 190 533 31 22 160 637.5 15 96.9 TBB35ABBWV
350 14 16 Gearbox Stainless steel 338.5 282.5 190 533 31 22 160 637.5 15 96.9 TBB35ABAWV
400 16 10 Gearbox Stainless steel 380 308 216 597 31 27 160 719 18 130.9 TBB40ABBWV
400 16 16 Gearbox Stainless steel 380 308 216 597 31 27 160 719 18 130.9 TBB40ABAWV
450 18 10 Gearbox Stainless steel 380.5 340 222 640 38 36 190 758.5 20 191 TBB45ABBWV
450 18 16 Gearbox Stainless steel 380.5 340 222 640 38 36 190 758 20 191 TBB45ABAWV
500 20 10 Gearbox Stainless steel 432.5 380 229 715 38 36 210 850.5 20 225.4 TBB50ABBWV
500 20 16 Gearbox Stainless steel 432.5 380 229 715 38 36 210 850.5 20 225.4 TBB50ABAWV
600 24 10 Gearbox Stainless steel 494 440 267 840 80 60 210 1014 24 345.5 TBB60ABBWV
600 24 16 Gearbox Stainless steel 494 440 267 840 80 60 210 1014 24 345.5 TBB60ABAWV
700 28 10 Gearbox Stainless steel 590 490 292 927 106 65 300 1186 30 489.3 TBB70ABBWV
700 28 16 Gearbox Stainless steel 590 490 292 927 106 65 300 1186 30 489.3 TBB70ABAWV
750 30 10 Gearbox Stainless steel 590 530 318 985 106 80 300 1226 25 526 TBB75ABBWV
750 30 16 Gearbox Stainless steel 590 530 318 985 106 80 300 1226 25 526 TBB75ABAWV
800 32 10 Gearbox Stainless steel 630 565 318 1060 106 80 300 1301 28 635.6 TBB80ABBWV
800 32 16 Gearbox Stainless steel 630 565 318 1060 106 80 300 1301 28 635.6 TBB80ABAWV
900 36 10 Gearbox Stainless steel 695 610 330 1178 110 80 350 1415 32 893 TBB90ABBWV
900 36 16 Gearbox Stainless steel 695 610 330 1178 110 80 350 1415 32 893 TBB90ABAWV
1000 40 10 Gearbox Stainless steel 770 675 410 1290 110 80 350 1555 32 1039 TBC10ABBWV
1000 40 16 Gearbox Stainless steel 770 675 410 1290 110 80 350 1555 32 1039 TBC10ABAWV
1100 44 10 Gearbox Stainless steel 815 733 410 1405 110 80 350 1658 32 1682 TBC11ABBWV
1100 44 16 Gearbox Stainless steel 815 733 410 1405 110 80 350 1658 32 1681 TBC11ABAWV
1200 48 10 Gearbox Stainless steel 875 818 470 1510 110 100 350 1803 40 2002 TBC12ABBWV
1200 48 16 Gearbox Stainless steel 875 818 470 1510 110 100 350 1803 40 2002 TBC12ABAWV

Features

Material and coating

DN40-200
Item Designation Material Coating
1 Valve Body Ductile Iron EN GJS-400-5 Blue Epoxy RAL 5005 150 µ
2 Bushing Acetal « DELRIN » (POM)  
3 O'ring Nitrile  
4 Upper shaft Stainless Steel X20Cr13 according EN10088-3  
5 Seat EPDM with ACS  
6 Disc Ductile Iron EN GJS-400-15 Black Epoxy 150 µ with ACS
Stainless Steel CF8M  
7 Lower shaft Stainless Steel X20Cr13 according EN10088-3  
8

Retaining ring

 Zinc plated steel  
9 Circlip Zinc plated steel DIN 472
10 Lower Plug EPDM  
11 Bushing Steel BZ PTFE
12

Features TAG

 Polyester  
RAP_centre_double_bride_S13_AEP_nom

Material and coating

DN250-500
Item Designation Material Coating
1 Valve Body Ductile Iron EN GJS-400-15 Blue Epoxy RAL 5005 150 µ
2 Bushing Steel BZ PTFE
3 O'ring Nitrile  
4 Upper shaft Stainless Steel X20Cr13 according EN10088-3  
5 Seat EPDM with ACS  
6 Disc Ductile Iron EN GJS-400-15 Black Epoxy 150 µ with ACS
Stainless Steel CF8M  
7 Lower shaft Stainless Steel X20Cr13 according EN10088-3  
8

Retaining ring

 Zinc plated steel  
9 Circlip Zinc plated steel DIN 472
10 Lower Plug EPDM  
12 Bushing Steel BZ PTFE
13 Features TAG Polyester  
RAP_centre_double_bride_S13_AEP_nom

Material and coating

DN600-1200
Item Designation Material Coating
1 Valve Body Ductile Iron EN GJS-400-15 Blue Epoxy RAL 5005 150 µ
2 Bushing Steel BZ PTFE
3 O'ring Nitrile  
4 Upper shaft Stainless Steel X20Cr13 according EN10088-3  
5 Seat EPDM with ACS  
6 Disc Ductile Iron EN GJS-400-15 Black Epoxy 150 µ with ACS
Stainless Steel CF8M  
7 Lower shaft Stainless Steel X20Cr13 according EN10088-3  
8 Upper cover Carbon steel Black Epoxy powder
9 Bolt of upper cover Zinc plated steel DIN 472
10 Lower cover Zinc plated steel  
11 Zegi ring Body Zinc plated steel  
12 Screw (DN800/1100) Zinc plated steel DIN 913
13 Retaining ring shaft (only DN600/800) Zinc plated steel DIN 471
14 Features TAG Polyester  
RAP_centre_double_bride_S13_AEP_nom

Upper flange

DN DN ISO P E F S T axb H
mm inch mm mm mm mm mm mm mm mm
40 1.5” F-07 13            
50 2” F-07 13            
60 2.5” F-07 V            
80 3" F-07 13            
100 4" F-07 13 30 11        
125 5" F-07 17 33 14        
150 6" F-07 17 33 14        
200 8" F-07 20.3 33 17        
250 10" F-10 26.2 23 22 3 70    
300 12" F-10 26.2 23 22 3 70    
350 14" F-10 28 31 22 3 70    
400 16" F-12 33 31 27 4 85    
450 18" F-14 48 38 36 4 100    
500 20" F-14 48 38 36 4 100    
600 24" F-16   80 60 5 130 18x11 7
700 28" F-25   106 65 5 200 18x11 7
800 32" F-25   106 80 5 200 22x14 9
900 36" F-25   110 80 5 200 22x14 9
1000 40" F-25   110 80 5 200 22x14 9
1100 44" F-25   110   5 200 22x14 9
1200 48" F-30   110 100 5 230 28x16 10
RAP_centre_double_bride_AEP_bride_superieure

Operation by hand lever type MN and MR

 The operation by hand lever allows the disc between 0 and 90°. There are two types of manual control lever, the MN type and type MR.

MN type is the referenced for our range of Wafer and Lug valves. The lever allows seven positions of the butterfly between 0° to 90° with anchorage by spring.

DN C D Hand lever type MN Hand lever type MR
mm inch mm mm E2 H2 Y2 L2 M2 Mass E3 H3 Y3 L3 M3 Mass
40 1.5” 106 150 49 159 234 220 90 7.73 113 223 298 260 90 7.73
50 2” 108 165 49 169 251.5 220 90 8.82 113 233 315.5 260 90 8.82
65 2.5” 112 185 49 184 176.5 220 90 9.90 113 248 340.5 260 90 9.90
80 3" 114 200 60 201 301 260 90 11.15 113 254 354 260 90 11.15
100 4" 127 229 60 225 339.5 260 90 13.55 113 278 392.4 260 90 13.55
125 5” 140 254 75 255 381 315 90 19.24 113 293 419.5 310 90 19.24
150 6" 140 285 75 268 411 315 90 21.30 113 306 449 310 90 21.30
200 8" 152 345 75 300 472.5 315 90 34.10 113 338 510.5 310 90 34.10
250 10" 165 406             121 403.5 613.5 500 130 50.50
300 12" 178 480             121 429 669 500 130 73.60
350 14" 190 535             121 459.5 722.5 500 130 96.70
RAP_centre_double_bride_S13_AEP_levier_dim

Operation by gearbox MDV and Handwheel

DN C D Gearbox type MDV with handwheel
mm inch mm mm E4 H4 Y4 L4 M4 N Mass
40 1.5” 106 150 125 198 273 129 43.5 50.5 102.95
50 2” 108 165 125 208 290.5 129 43.5 50.5 107.85
65 2.5” 112 185 125 223 315.5 129 43.5 50.5 124.21
80 3" 114 200 125 229 329 129 43.5 50.5 129.60
100 4" 127 229 125 253 367.5 129 43.5 50.5 141.78
125 5” 140 254 160 285.5 412 135 43.5 50.5 191.20
150 6" 152 285 160 298.5 441.5 135 43.5 50.5 251.09
200 8” 165 345 200 355 527.5 152 52.5 57 293.24
250 10" 178 406 250 442.5 652.5 222 61.2 70 422.38
300 12" 190 480 250 468 708 222 61.2 70 615.00
350 14" 216 535 250 498.5 761.5 222 61.2 70 852.56
400 16" 216 597 300 572.5 880.5 278 69 72.5 1099.77
450 18" 222 640 400 630.5 970.5 321 96.5 91.5 1712.78
500 20" 229 715 400 682.5 1063 321 96.5 91.5 2056.62
600 24" 267 840 500 798.5 1239 408 137.5 140 2608.29
700 28" 292 927 600 944.5 1435 424 137.5 140 3875.70
750 30" 318 985 600 944.5 1475 456 137.5 140 4340.13
800 32" 318 1060 600 984.5 1550 456 137.5 140 5054.70
900 36" 330 1170 700 1109 1719 510 180 156 7266.18
1000 40" 410 1290 700 1184 1859 579 180 156 9638.01
1100 44" 410 1405 700 1229 1962 579 180 156 11367.49
1200 48" 470 1510 700 1310 2128 593 252 201 14362.75
RAP_double_brides_assainissement_reducteur-dim

Screwing - Main dimensions

DN E PN10 PN16 ANSI 150 Lbs
K e M L L1 Number K e M L L1 Number K e M L L1 Number
40 18 110 16 M16 60 75 8 110 16 M16 60 75 8 98.4 17.5 W 1/2" 55 70 8
50 18 125 18 M16 60 75 8 125 18 M16 60 75 8 120.6 19.0 W 5/8" 60 80 8
65 18 145 18 M16 60 75 8 145 18 M16 60 75 8 139.7 22.2 W 5/8" 65 80 8
80 46 160 20 M16 65 80 16 160 20 M16 65 80 16 152.4 23.8 W 5/8" 70 85 8
100 46 180 20 M16 65 80 16 180 20 M16 65 80 16 190.5 23.8 W 5/8" 70 85 16
125 22 210 22 M16 70 85 16 210 22 M16 70 85 16 215.9 23.8   75 95 16
150 22 240 22 M20 70 95 16 240 22 M20 70 95 16 241.3 25.4 W 3/4" 75 100 16
200 23 295 24 M20 75 95 16 295 24 M20 75 95 16 298.5 28.6 W 3/4" 80 105 16
250 25 350 26 M20 80 100 24 355 26 M24 85 110 24 361.9 30.2 W 7/8" 90 110 24
300 28 400 26 M20 80 105 24 410 28 M24 90 115 24 431.8 31.7 W 7/8" 90 115 24
350 30 460 26 M20 85 105 32 470 30 M24 95 120 32 476.2 34.9

W 1"

 100 130 24
400 32 515 26 M24 90 115 32 525 32 M27 100 130 32 539.7 36.5

W 1"

 105 135 32
450 34 565 26 M24 95 120 40 585 32 M27 105 130 40 577.8 39.7

W1.1/8"

 115 145 32
500 36 620 28 M24 100 125 40 650 34 M30 110 140 40 635.0 46.0

W1.1/8"

 125 150 40
600 41 725 28 M27 105 135 40 770 36 M33 120 155 40 749.3 47.6 W1.1/4" 130 165 40
700 44 840 30 M27 110 140 48 840 36 M33 125 155 48 863.5 52.5 W1.1/4" 140 175 56
750 48 900 32 M30 120 150 48 900 38 M33 130 165 48 914.4 54 W1.1/4" 145 180 56
800 48 950 32 M30 120 150 48 950 38 M36 135 170 48 978 57 W1.1/2" 155 195 56
900 51 1050 34 M30 125 160 56 1050 40 M36 140 175 56 1086 60 W1.1/2" 165 200 65
1000 55 1160 34 M33 135 165 56 1170 42 M39 150 190 56 1200 63.5 W1.1/2" 170 210 72
1100 58 1270 38 M33 145 180 64 1270 48 M39 160 195 64 1314.5 101 W1.1/2" 210 250 80
1200 62 1380 38 M36 150 185 65 1390 48 M45 170 215 65 1422 108 W1.1/2" 220 260 88

Tapped holes for the flanges assembly will be :

  • Metric for the PN standards
  • Whitworth type for the NSI 150 standards0

For other tappings, consult us.

RAP_double_brides_assainissement_visserie-dim

Packing

DN Number of valves with hand lever per crate
mm DOUBLE FLANGED S13 Crate dimensions
40 70  
50 70  
65 60  
80 55 1200 x 800 x800
100 50
125 35
150 35
200 25
250 7
300 7
DN Number of valves with gearbox per crate
mm DOUBLE FLANGED S13 Crate dimensions
40 50  
50 50  
65 45  
80 45 1200 x 800 x800
100 40
125 25
150 25
200 17
250 7
300 7
350 7
400 5
450 2 900 x 750 x600
500 2
600 2 1150 x 900 x 800
700 2 1200 x 1100 x 800
800 1 1500 x 1200 x 500
900 1 1500 x 1200 x 500
1000 1 1600 x 1350 x600
1200 1 1950 x 1600 x 700

Added values

A) Bushings: They ensure alignment of the shafts as well as reducing the torque. Together with the shaft packing give additional safety preventing internal leakage and external contamination.

B) Body design: The long-neck construction allows easy installation and provision for insulation, even if the valves are assembled between flanges. The top and bottom alignment lugs make mounting between DIN-ANSI-JIS, etc., flanges very easy.

C) Spherical disc: The disc edge in contact with the seat is completely spherical providing smooth operation and considerable reduction of the valve torque. The combination of the valve tightness and reduced friction, especially around the shafts, gives a three folds increase in the life span of the seat

D) Interchangeability: All valve components can be dismantled and the replaceable parts are interchangeable with concentric flanged butterfly valves.

RAP_centre_double_bride_AEP_coupe

Compliance with standards

Company: designer and manufacturer works according to ISO 9001 by AENOR n° ES 0780 / 1997

Product: complies to the NF EN1074-1 and DVGW standards (up to DN700). Rest of the range in process.

Dimensions :

NF EN 593: Metallic butterfly valves

NF EN 558-1: Face to Face dimensions series 13

EN ISO 5752: Metal valves for flanged pipe network. Table 5 short series

API 609: Butterfly valves Flanged, Lugged and Wafer

NF EN 1092-2: Flange connections to the piping material

Materials: NF EN1503: Valves. Materials for bodies, bonnets and covers

Operation:

EN ISO 5210 : Multi-turn actuator to valve

EN ISO 5211 : Part-turn actuator to valve

Assembling between flanges: ISO PN10 or PN16, DIN 2632 PN10 or PN16, EN-1092 PN10 or PN16, NFE 29222 PN10 or PN16

Identification : EN ISO 5209: Marking

Hydraulic Tests:

EN ISO 5208: Pressure (Ratio A-No leakage)

EN 12 266-1: Sealing (Ratio A-No leakage)

Drinking water approvals : ACS for all the valves from DN32 up to DN900 mm according to the order from May 29th 1997 amended by the circular from the French Ministry of Health DGS/SD7 A 2002 n° 571 and dated from November 25th 2002.

In accordance with the German rules DVGW n° 6201CM0237.

Traceability

Traceability system for LUG butterfly valves allows since the departure from the factory to the last day of life of the valve to obtain information relating to the product origin and quality both of coatings and materials, manufacturing, inspection and hydraulic tests results.

From the moment the order is in the computer system, starts the program of manufacturing. A serial number is automatically assigned to this valve. Manufacturing sheet will be marked with this number. This sheet will contain all information about manufacture and inspection of the valve. At the end, two stickers with the number of identification will be placed in the body and in the top flange of the valve.

Assembling

The trial sheet assembly is identified with the internal number. This sheet has as many labels as valves to assemble. This label identifies the person responsible for the mounting and the possible problems during the assembling. The document contains the components of the valve if certification 3.1 is required by the customer.

Hydraulic tests

Label identifying the inspector and the results of the tests. Any remark produced during the tests and the torque is shown.

Foundry marking

Body and disc: manufacturer and type of material.

RAP_centre_sans_brides_WAFER_S20_AEP_tracabilite
RAP_centre_sans_brides_WAFER_S20_AEP_tracabilite

Marking (identification/labels)

RAP_centre_double_bride_AEP_marquage
RAP_centre_double_bride_AEP_marquage
RAP_centre_double_bride_AEP_marquage
RAP_centre_double_bride_AEP_marquage
RAP_centre_double_bride_AEP_marquage

Hydraulic characteristics

Headloss Δp inside the valve is expressed with the flow coefficient Kv which is the flow going through the valve at a temperature 20ºC and generating a headloss of 1 bar.

For the water we obtain the simplified calculation below with Q in m³/h and Kv in m³/h, Δp in bar

Flow coefficient Kv (in m3/h) according to the opening angle of the disc:
DN Degree of valve opening
25 30 40 50 60 70 80 90
40 2.5 4.3 9 15 22 38 60 68
50 5 7.7 14 23 45 60 90 112
60-65 8.6 12.9 22 36 70 90 138 172
80 13 19 33 54 110 138 207 258
100 24 36 63 103 200 260 410 474
150 146 125 215 353 690 890 1420 1680
200 146 215 360 603 1120 1510 2350 2800
250 224 336 580 990 1850 3190 3700 4310
300 327 475 860 1380 2670 3490 5215 6465
350 430 645 1120 1896 3535 4395 6980 8620
400 560 775 1465 2285 4395 5600 9310 10775
450 775 1077 1980 3190 6120 7930 12700 15086
500 970 1380 2415 3965 7500 9900 15085 18965
600 1293 1895 3275 5260 10130 14225 20700 24137
700 1350 1990 3860 5980 10600 17100 25300 36000
800 1600 2200 4500 8200 12500 20000 29000 44000
900 1800 2300 6100 10400 17500 29000 42000 58000
1000 2500 3800 8700 13500 23000 37500 59200 80500
1100 4450 6350 10560 18210 28650 54560 72540 97586
1200 5400 7800 12500 22600 35500 61500 82000 110500

Mechanical characteristics

Necessary torque, in Nm, to close the disc at ΔP. These torques have been obtained with the standard range, water at 20°C and EPDM seats.

bar DN
40 50 65 80 100 150 200 250 300 350 400 450 500 600 700 800 900 1000 1100 1200
3 5 5 515 17 2 48 90 126 161 245 520 590 840 1000 1650 2300 4700 6500 7000 8500
6 6 7 16 20 29 75 120 210 270 300 624 1120 1390 2200 3300 4600 6800 8500 9000 12000
10 9 13 20 23 42 90 140 270 390 500 897 1450 1800 3450 5000 6500 8500 11500 12000 15500
16 15 17 25 28 50 110 215 350 560 950 1400 1950 2500 3800 5860 9500 11500 15000 16000 22000

Documents

9 results
Download selection (0)
PDF (35.67 MB)
Catalog
en
Catalog Wafer and Lug
Catalog
PDF (35.67 MB)
en
PDF (243.72 KB)
Installation guide
en
Selection Sheet-Butterfly valves Wafer and Lug
Installation guide
PDF (243.72 KB)
en
PDF (561.87 KB)
Certificate
en
BV-Certificate_conformity_SAINT-GOBAIN PAM CANALISATION
Certificate
PDF (561.87 KB)
en
PDF (344.9 KB)
Certificate
en
BV-EN1074-EURO20-EURO20 NEW-Certificate_conformity_SGPAM_factory_TOUL
Certificate
PDF (344.9 KB)
en