EURO 20 NG Type 23 motorizable and motorized
The EURO 20 type 23:
- is composed of flanges with reduced face to face dimensions
- version NG : DN65-300
Technical design
Technical design
Motorizable version
Motorized version
| 65 | Motorizable - Adaptor F10 / Ø200 / 4 holes 12 on Ø102 | 10 16 | 20 | RDA65BFCH | ||||||
| 80 | Motorizable - Adaptor F10 / Ø200 / 4 holes 12 on Ø102 | 10 16 | 21 | RDA80BFCH | ||||||
| 100 | Motorizable - Adaptor F10 / Ø200 / 4 holes 12 on Ø102 | 10 16 | 25 | RDB10BFCH | ||||||
| 125 | Motorizable - Adaptor F10 / Ø200 / 4 holes 12 on Ø102 | 10 16 | 32 | RDB12BFCH | ||||||
| 150 | Motorizable - Adaptor F10 / Ø200 / 4 holes 12 on Ø102 | 10 16 | 40 | RDB15BFCH | ||||||
| 200 | Motorizable - Adaptor F14 / Ø305 / 4 holes 15 on Ø140 | 10 | 84 | RDB20BFBH | ||||||
| 200 | Motorizable - Adaptor F14 / Ø305 / 4 holes 15 on Ø140 | 16 | 84 | RDB20BFAH | ||||||
| 250 | Motorizable - Adaptor F14 / Ø305 / 4 holes 15 on Ø140 | 10 | 126 | RDB25BFBH | ||||||
| 250 | Motorizable - Adaptor F14 / Ø305 / 4 holes 15 on Ø140 | 16 | 126 | RDB25BFAH | ||||||
| 300 | Motorizable - Adaptor F14 / Ø305 / 4 holes 15 on Ø140 | 10 | 149 | RDB30BFBH | ||||||
| 300 | Motorizable - Adaptor F14 / Ø305 / 4 holes 15 on Ø140 | 16 | 149 | RDB30BFAH | ||||||
| 350 | Motorizable - Adaptor F14 / Ø305 / 4 holes 15 on Ø140 | 10 | 194 | RDB35BFBH | ||||||
| 350 | Motorizable - Adaptor F14 / Ø305 / 4 holes 15 on Ø140 | 16 | 194 | RDB35BFAH | ||||||
| 400 | Motorizable - Adaptor F14 / Ø305 / 4 holes 15 on Ø140 | 10 | 315 | REB40BFBH | ||||||
| 400 | Motorizable - Adaptor F14 / Ø305 / 4 holes 15 on Ø140 | 16 | 315 | REB40BFAH | ||||||
| 65 | Motorized | 185 | 170 | SA 07-6 | 510 | 514 | 620 | 10 16 | 39 | RDA65BHCH |
| 80 | Motorized | 200 | 180 | SA 07-6 | 517 | 514 | 620 | 10 16 | 40 | RDA80BHCH |
| 100 | Motorized | 225 | 190 | SA 10.2 | 540 | 536 | 678 | 10 16 | 48 | RDB10BHCH |
| 125 | Motorized | 250 | 200 | SA 10.2 | 552 | 536 | 736 | 10 16 | 55 | RDB12BHCH |
| 150 | Motorized | 285 | 210 | SA 10.2 | 570 | 536 | 788 | 10 16 | 63 | RDB15BHCH |
| 200 | Motorized | 340 | 230 | SA 14.2 | 635 | 713 | 965 | 10 | 130 | RDB20BHBH |
| 200 | Motorized | 340 | 230 | SA 14.2 | 635 | 713 | 965 | 16 | 130 | RDB20BHAH |
| 250 | Motorized | 400 | 250 | SA 14.6 | 665 | 720 | 1085 | 10 | 165 | RDB25BHBH |
| 250 | Motorized | 400 | 250 | SA 14.6 | 665 | 720 | 1085 | 16 | 165 | RDB25BHAH |
| 300 | Motorized | 455 | 270 | SA 14.6 | 693 | 720 | 1198 | 10 | 199 | RDB30BHBH |
| 300 | Motorized | 455 | 270 | SA 14.6 | 693 | 720 | 1198 | 16 | 199 | RDB30BHAH |
| 350 | Motorized | 520 | 290 | SA 14.6 | 725 | 720 | 1230 | 10 | 244 | RDB35BHBH |
| 350 | Motorized | 520 | 290 | SA 14.6 | 725 | 720 | 1230 | 16 | 244 | RDB35BHAH |
| 400 | Motorized | 580 | 310 | SA 14.6 | 755 | 720 | 1419 | 10 | 365 | REB40BHBH |
| 400 | Motorized | 580 | 310 | SA 14.6 | 755 | 720 | 1419 | 16 | 365 | REB40BHAH |
Features
Material and coating
| Item | Designation | Material | Coating |
|---|---|---|---|
| 1 | Yoke - Flange | Ductile iron | Epoxy 250 microns |
| 2 | Adaptor | Carbon steel | Epoxy 250 microns |
| 3 | 4 bolts CHC M10/30 - 4 washers M10/2 | Steel | Zinc plated |
| 4 | Clockwise operating stem |
Stainless steel type X20Cr13 according to EN10088-3 |
|
| 5 | Key | Steel | |
| 6 | 4 bolts H 10/45 - 8 washers M10/2 | Steel | Zinc plated |
Detail of key dimensions of the operating stem (Clockwise)
| DN | Square S | d | B | K | E | Key |
|---|---|---|---|---|---|---|
| mm | mm | mm | mm | mm | mm | |
| 65 | 17.3 | 20 f 8 | 28 | 4 | 16.5 | 6 x 6 x 28 |
| 80 | 17.3 | 20 f 8 | 28 | 4 | 16.5 | 6 x 6 x 28 |
| 100 | 19.3 | 22 f 8 | 36 | 4 | 18.5 | 6 x 6 x 36 |
| 125 | 19.3 | 22 f 8 | 36 | 4 | 18.5 | 6 x 6 x 36 |
| 150 | 19.3 | 22 f 8 | 36 | 4 | 18.5 | 6 x 6 x 36 |
| 200 | 24.3 | 28 f 8 | 45 | 5 | 20.0 | 8 x 7 x 45 |
| 250 | 27.3 | 32 f 8 | 50 | 5 | 27.0 | 10 x 8 x 50 |
| 300 | 27.3 | 32 f 8 | 50 | 5 | 27.0 | 10 x 8 x 50 |
| 350 | 27.3 | 32 f 8 | 50 | 5 | 27.0 | 10 x 8 x 50 |
| 400 | 27.3 | 33 f 8 | 56 | 7 | 28.0 | 10 x 8 x 56 |
Choice of the servomotor: values in Nm
| DN | Nominal torque | Setting the torque switch Valve closing | |
|---|---|---|---|
| mm | Nm | Initial torque in factory | Maxi torque |
| 65 | 40 | 50 | 60 |
| 80 | 40 | 50 | 60 |
| 100 | 60 | 80 | 100 |
| 125 | 60 | 80 | 100 |
| 150 | 70 | 95 | 120 |
| 200 | 170 | 200 | 250 |
| 250 | 200 | 250 | 300 |
| 300 | 250 | 300 | 400 |
| 350 | 250 | 300 | 400 |
| 400 | 250 | 300 | 400 |
The nominal torque of the motor must be equal or greater than the maximum setting of the torque switch.
Closing the valve: motor stops through torque switch. Limit switch on security.
Opening the valve: motor stops through limit switch. Torque switch on security.
Assembly of the motor
- Put the 4 bolts H
- Assembly the adaptor on the motor with the 4 CHC bolts
- Assembly the motor/adaptor on top of the operating stem of the valve
- Tighten the bolts
Conformity to Standards
Product :
- NF EN 1074-2
Tests in factory :
- NF EN 12266-1
Face to face dimensions:
- EN 558-2 ISO 5752 serie 15 for type 21
- EN 558-2 ISO 5752 serie 14 for type 23
Flange drilling:
- EN 1092-2
- ISO 7005-2
- DIN 2501
The materials of the components and the epoxy coating satisfy the French and European standards in matter of potable water.
Documents
Documents
9 results
