BLUTOP
EURO 20 NG Type BLUTOP
The EURO 20 type BLUTOP:
- is composed of a BE socket weld, PVC/PE tubes, and Blutop pipes
- type NG : DE75, 90, 110, 125 and 160
Technical design
Technical design
| 75 | Anti-Clockwise | Cap | 333 | 159 | 87.0 | 89.7 | 363 | 283 | 60 | 105x174 | 17 | 15.2 | 14 | 12.3 | RDL75KDXH |
| 90 | Anti-Clockwise | Cap | 333 | 135 | 99 | 126 | 361 | 275 | 66 | 105x174 | 17 | 15.2 | 14 | 12.8 | RDL90KDXH |
| 110 | Anti-Clockwise | Cap | 335 | 138 | 108.5 | 146.6 | 419.5 | 322 | 77.5 | 111x194 | 23 | 18.5 | 17 | 16.2 | RDM11KDXH |
| 125 | Anti-Clockwise | Cap | 374 | 144 | 115 | 163.2 | 487.5 | 382.5 | 85 | 126x220 | 28 | 18.5 | 17 | 22.8 | RDM12KDXH |
| 140 | Anti-Clockwise | Cap | 374 | 158 | 108 | 155.6 | 487.5 | 373.5 | 94 | 126x220 | 28 | 18.5 | 17 | 24.8 | RDM14KDXH |
| 160 | Anti-Clockwise | Cap | 387 | 159 | 114 | 175.3 | 535 | 410 | 105 | 136x257 | 32 | 20.6 | 19 | 30 | RDM16KDXH |
| 75 | Clockwise | Bare shaft | 333 | 159 | 87 | 89.7 | 363 | 283 | 60 | 105x174 | 17 | 18.5 | 17 | 12.1 | RDL75KBXH |
| 90 | Clockwise | Bare shaft | 333 | 135 | 99 | 126 | 361 | 275 | 66 | 105x174 | 17 | 18.5 | 17 | 12.6 | RDL90KBXH |
| 110 | Clockwise | Bare shaft | 335 | 138 | 108.5 | 146.6 | 419.5 | 322 | 77.5 | 111x194 | 23 | 20.6 | 19 | 16 | RDM11KBXH |
| 125 | Clockwise | Bare shaft | 374 | 144 | 115 | 163.2 | 487.5 | 382.5 | 85 | 126x220 | 28 | 20.6 | 19 | 22.6 | RDM12KBXH |
| 140 | Clockwise | Bare shaft | 374 | 158 | 108 | 155.6 | 487.5 | 373.5 | 94 | 126x220 | 28 | 20.6 | 19 | 25 | RDM14KBXH |
| 160 | Clockwise | Bare shaft | 387 | 159 | 114 | 175.3 | 535 | 410 | 105 | 136x257 | 32 | 20.6 | 19 | 29.8 | RDM16KBXH |
Features
Material and coating
| Item | Designation | Designation | Coating |
|---|---|---|---|
| 1 | Operating stem | Stainless steel type X20Cr13 acc. EN10088-3 | |
| 2 | Bearing nut | Ductile Iron GS EN GJS 400-15 or 500-7 acc. EN 1563 | EVA (Ethylene Vinyl Acetate) 250 microns mini |
| 3 | Bush | Brass type CuZn39Pb2 or CuZN40Pb2 acc. EN12164 | |
| 4 | Body | Ductile Iron GS EN GJS 400-15 or 500-7 acc. EN 1563 | Blue Epoxy (*) |
| 5 | Operating nut | Brass type CuZn39Pb2 or CuZN40Pb2 acc. EN12164 | |
| 6 | Gate | Ductile iron acc. EN1563 and EN681-1 selon EN 1563 | EPDM on ductile iron and polyamide brackets |
| 7 | Bonnet | Ductile Iron GS EN GJS 400-15 or 500-7 acc. EN 1563 | Blue Epoxy (*) |
| 8 | Yoke | Ductile Iron GS EN GJS 400-15 or 500-7 acc. EN 1563 | EVA (Ethylene Vinyl Acetate) 250 microns |
| 9 | Van O Fra | Chloropren class 60 WA category acc. EN 681-1 | |
| 10 | Seal bush | Elastomer Nitrile NBR WRC 70 | |
| 11 | Lock washer | Stainless steel 304 or X2CrMoTi18-2 acc. EN 10088 | |
| 12 | Yoke-Bonnet- gasket | Nitrile NBR 70 | |
| 13 | Bearing bonnet joint | Polyamide type PA 6-6 | |
| 14 | Thrust washer | Polyamide type PA 6-6 | |
| 15 | Body bonnet gasket | Elastomer EPDM acc. EN681-1 | |
| (*) thickness 250 microns mini average according prescriptions of EN14901 | |||
Type of joints
Pieces to be bought separately.
| Material | Component | References | |||||
|---|---|---|---|---|---|---|---|
| DE 75 | DE 90 | DE 110 | DE 125 | DE 140 | DE 160 | ||
| Ductile Iron | BLUTOP Vi gasket | JXL75CA | JXL90CA | JXM11CA | JXM12CA | JXM14CA | JXM16CA |
| PVC or PE | BLUTOP gasket | JXL75BA | JXL90BA | JXM11BA | JXM12BA | JXM14BA | JXM16BA |
| PVC or PE | IZIFIT-K anchoring gland | - | - | - | - | JZM14VXNN2 | JZM16VXNN2 |
| PVC or PE | Izifit anchored gasket | JIL75CA | JIL90CA | JIM11CA | JIM12CA | - | - |
Label
Conformity to Standards
Product :
- NF EN 1074-2
Tests in factory :
- NF EN 12266-1
Face to face dimensions:
- EN 558-2 ISO 5752 serie 15 for type 21
- EN 558-2 ISO 5752 serie 14 for type 23
Flange drilling:
- EN 1092-2
- ISO 7005-2
- DIN 2501
The materials of the components and the epoxy coating satisfy the French and European standards in matter of potable water.
Documents
Documents
9 results
