Fire hydrant ATLAS Traffic DN150 - Symmetric outlets
- Operating square cap 30x30.
- Straight valve box and duckfoot bend
- Automatic drainage function
- Outlets: 2 symmetrical lateral outlets and 1 symmetrical frontal outlet
Technical design
| 150 | Straight box | 2xDN100 + 1xDN65 | 1000 | 465 | 560 | 1230 | 2010 | 380 | 220 | 250x250 | 170 | RYB15ABBDC |
| 150 | Straight box(*) | 2xDN100 + 1xDN65 | 1250 | 465 | 560 | 1480 | 2260 | 380 | 220 | 250x250 | 145 | RYB15AKCDC |
| 150 | Straight box | 2xDN100 + 1xDN65 | 1250 | 465 | 560 | 1480 | 2260 | 380 | 220 | 250x250 | 170 | RYB15APCDC |
Features
Field of use
Fire hydrants pillar or underground type are designed, according to applicable standards and regulations, for exclusive use of fire protection and using drinking water or raw water network.
They must be handled and used in strict compliance with the recommendations and best practice by personnel trained with these recommendations.
These devices must be inspected periodically (as required by regulations or recommended instructions) to verify and maintain their proper and safe operation.
Material and coating
|
Item |
Designation |
Material |
Coating |
|---|---|---|---|
|
70 |
Anti-sand filter |
Brass (Cu Zn 30) |
|
|
69 |
Identification number |
Aluminium |
Anodic processing |
|
65 |
Outlet joint 2“1/2 |
Polyurethane |
|
|
64 |
2 outlet joints 4“ |
Polyurethane |
|
|
61 |
Symmetrical Outlet + plug 2“1/2 |
Aluminium |
|
|
60 |
2 Symmetrical Outlet + plug 4 “ |
Aluminium |
|
|
59 |
8 nuts HM 20 |
Steel CL 8/8 |
Zinc Bichromated |
|
58 |
Fastener ring |
Stainless steel Z 12 C 13 |
|
|
57 |
Joint between upper and lower body |
Nitrile |
|
|
56 |
4 screws CHC M 20 x 65 |
Steel CL 8/8 |
Zinc Bichromated |
|
55 |
2 half-flanges (body) |
Ductile Iron EN GJS 400-15 or 500-7 en 1563 |
Epoxy Powder + red Polyurethane |
|
53 |
Support ring |
Polyacetal |
|
|
51 |
Duckfoot bend |
Ductile Iron 420-5 |
Epoxy Powder |
|
50 |
Joint cap/bonnet |
EPDM Mousse |
|
|
49 |
Bonnet |
Ductile Iron EN GJS 400-15 or 500-7 en 1563 |
Epoxy Powder + red Polyurethane |
|
48 |
Joint lid/body |
Polyurethane |
|
|
47 |
Lid joint |
Reinzoloid |
|
|
46 |
Couvercle Porte Vis |
Ductile Iron 400-15 |
Epoxy Powder |
|
45 |
O’ring 19.8 x 3.6 |
Nitrile |
|
|
44 |
O’ring 31.42 x 2.62 |
Nitrile |
|
|
43 |
Joint Racleur V 24 |
EPDM |
|
|
42 |
Porte Palier Vissé |
Cu Zn 39 Pb 2 |
|
|
41 |
O’ ring 41.2 x 5.7 |
EPDM |
|
|
40 |
Palier Supérieur |
Polyacetal |
|
|
39 |
Operating stem |
Z20 C13 |
|
|
38 |
Operating spindle |
Steel XC 38 |
Black Cataphoresis |
|
37 |
Body : upper part |
Ductile Iron EN GJS 400-15 or 500-7 en 1563 |
Epoxy Powder + red Polyurethane |
|
36 |
Body : lower part |
Ductile Iron EN GJS 400-15 or 500-7 en 1563 |
Epoxy Powder + red Polyurethane |
|
35 |
8 screws HM 20 x 70 |
Steel CL 8/8 |
Zinc Bichromated |
|
33 |
6 nuts HM 16 |
Steel CL 8/8 |
Zinc Bichromated |
|
32 |
6 screws HM 16 x 70 |
Steel CL 8/8 |
Zinc Bichromated |
|
31 |
3 Cales de Serrage |
Ductile Iron EN GJS 400-15 or 500-7 en 1563 |
Epoxy Powder + red Polyurethane |
|
29 |
2 Demi-Plaques de Trottoir |
Ductile Iron EN GJS 400-15 or 500-7 en 1563 |
Bituminous paint |
|
28 |
Chain |
Treated low carbon steel |
|
|
27 |
Washout tube DN 20 |
PVC |
|
|
26 |
4 Esses de Fixation |
Z 12 C 13 Treated |
|
|
25 |
2 half joints |
EPDM |
|
|
24 |
4 nuts Q M 10 |
Steel CL 8/8 |
Zinc Bichromated |
|
23 |
4 screws CHC M 10 x 30 |
Steel CL 8/8 |
Zinc Bichromated |
|
22 |
2 Adjustable junction box |
Ductile Iron EN GJS 400-15 or 500-7 en 1563 |
Bituminous paint |
|
21 |
Joint Flange/Body |
Nitrile |
|
|
20 |
Screw CHC M 8 x 25 |
Steel CL 8/8 |
Zinc Bichromated |
|
19 |
Coquille de Manœuvre |
Ductile Iron 400-15 |
Dacromet +red Polyurethane |
|
18 |
Bride Vissée Inférieure |
Ductile Iron EN GJS 400-15 or 500-7 en 1563 |
Epoxy Powder + red Polyurethane |
|
17 |
Support Palier Inférieur |
Ductile Iron EN GJS 400-15 or 500-7 en 1563 |
Epoxy Powder |
|
16 |
Porte Palier Vissé |
Cu Zn 39 Pb 2 |
|
|
15 |
Joint diameter 210x155x3 |
Joint Reinz AFM 39 |
|
|
14 |
Ensemble Butée à Billes |
Stainless steel |
|
|
13 |
Rondelle d’Appui |
Cu Zn 7 Pb 6 Zn 4 |
|
|
12 |
Screw Hm 8 x 8 |
Stainless steel A2 -70 |
|
|
11 |
Anneau d’appui |
Polyurethane |
|
|
10 |
Operating nut |
Cu Zn 39 Pb 2 |
|
|
09 |
Operating screw |
Z20 C13 |
|
|
08 |
Lower operating shaft |
Steel TU 56-B |
Galvanised |
|
07 |
Tube Allonge |
Ductile Iron 420-10 |
Epoxy Powder |
|
06 |
2 Joints de Tube Allonge |
Polyurethane |
|
|
05 |
Goupille à Sertir |
Z20 C13 |
|
|
04 |
Gate fully covered with EPDM |
Ductile Iron EN GJS 400-15 or 500-7 en 1563 |
EPDM |
|
03 |
Chemise |
Cu Sn 6 Zn 4 Pb 2 |
|
|
02 |
Mobile half-flanges |
Ductile Iron EN GJS 400-15 or 500-7 en 1563 |
Epoxy Powder |
|
01 |
Valve box |
Ductile Iron EN GJS 400-15 or 500-7 en 1563 |
Epoxy Powder |
Notice NPPI 08 A
Coating
Epoxy + red polyurethane 250 microns mini inside and outside for an excellent behavior against corrosion. A complementary coating on the air part enables him to resist the climatic requests: sun, the moon, bad weather, etc…
Reference of the repairing paint: 291163
