Fire hydrant C9+ Non Traffic DN100 - NFPA outlets
- Operating square cap 30x30mm
- Bended valve box
- Automatic drainage function
- Outlets: 2 NFPA lateral outlets and 1 NFPA frontal outlet
Technical design
| 100 | Bended box | 2xNFPA 194 2"½ + 1xNFPA 194 4"½-4" | 1006 | 1924 | 555 | 450 | 1175 | 152 | 100 x 90 | 77 | RYB10DEBWF |
Features
Field of use
Fire hydrants pillar or underground type are designed, according to applicable standards and regulations, for exclusive use of fire protection and using drinking water or raw water network.
They must be handled and used in strict compliance with the recommendations and best practice by personnel trained with these recommendations.
These devices must be inspected periodically (as required by regulations or recommended instructions) to verify and maintain their proper and safe operation.
Material and coating
| Item | Designation | Material | Coating |
|---|---|---|---|
|
1 |
1a -Operating cap |
Ductile iron GS EN GJS 400-15 or 500-7 EN 1563 |
Dacromet + grey Polyurethane 20 µm |
| 1c -Upper body | Ductile iron GS EN GJS 400-15 or 500-7 EN 1563 | Epoxy powder 250 µm + red Polyurethane 40 µm | |
| 1d-Extension tube | Ductile iron GS EN GJS 400-15 or 500-7 EN 1563 | Epoxy powder 250 µm + red Polyurethane 40 µm on 300 mm | |
| 1e -Duck foot | Ductile iron GS EN GJS 400-15 or 500-7 EN 1563 | Epoxy powder 250 µm | |
| 1b- Cover | ABS | Red polyurethane paint | |
|
2 |
Upper and lower bush |
Brass type Cu Zn 39 Pb 2EN 12164 |
|
|
3 |
Operating stem |
Steel type X20 Cr 13 EN 10088-3 |
|
|
4 |
Operating nut |
Brass type Cu Zn 40 Pb 2 EN 12164 |
|
|
5 |
Fixing screw |
Steel type CL 8/8 |
Dacromet |
|
6 |
Operating rod |
Steel type Tu 56 B |
Galvanized |
|
7 |
Valve |
Ductile iron GS EN GJS 400-15 or 500-7 EN 1563 |
Encapsulated EPDM |
|
8 |
Outlets |
Depending on models |
|
|
10 |
Screw CHC M 8 x 25 |
Steel type CL 8/8 |
Bichromated zinc |
Notice NPPI 02 A
