INTEGRAL

INTEGRAL PH1

INTEGRAL PH1 BioZinalium pipes with notches (CONTROL+) DN150 to 600 with STANDARD socket

Application

Aggressive or soft waters

Product family

Pipes

Technical design


150	6	5	1.5	170	173.4	100.5	220.8	40	20.18	TSB15S60VPV
200	6	5.1	1.5	222	225.2	106.5	275.1	40	27.13	TSB20S60VPV
250	6	5.3	1.6	274	276.8	105.5	328.6	38	34.92	TSB25S60VPV
300	6	5.6	1.6	326	328.8	107.5	385.3	35	43.91	TSB30S60VPV
350	6	6	1.6	378	380.9	110.5	444	32	54.4	TSB35S60VPV
400	6	6.3	1.6	429	431.9	112.5	494.6	30	64.75	TSB40S60VPV
500	6	7	1.6	532	535	117.5	600.9	28	89.47	TSB50S60VPV
600	6	7.7	1.6	635	638.1	132.5	712	26	117.8	TSB60S60VPV

Features

Legend:

DN : nominal diameter
Lu : laying length, in m
e: thickness according to EN598 + A1 – August 2009, in mm
er: thickness of the polyurethane, according to NF EN 15655 – March 2009, in mm
ØDE : external nominal diameter of the barrel according to EN598 + A1 – August 2009, in mm
ØDI : internal nominal diameter of the socket, in mm
P : nominal depth of the socket, in mm
ØB : nominal diameter of the socket, in mm
Mass : total mass per meter (including polyurethane coating and socket), determined with the nominal thickness, in kg/m
Reference : commercial reference Saint-Gobain PAM

Field of use:

Separate sewer system and combined sewer system
Application: gravity flow and rising main sewerage systems
Type of effluent: domestic wastewater and rainwater
Perfectly watertight
For effluents between pH1 and pH13
For the soils with 6 < pH < 9
Majority of the soils, except the acid peaty and polluted soils
Suitable for clay soils
Resistivity of the soils:

Main characteristics:

External coating ^BioZinalium: a layer of zinc-aluminium alloy enriched with copper Zn85Al15 (Cu), with surface density of 400 g/m² covered with a protective red (RAL 3011) layer AQUACOAT 80 μm (mini average), without VOC and without BPA.
Internal lining: polyurethane
Spigot and socket coating: reinforced red epoxy paint 300 microns (mini average)
SUREJOINT Standard Gasket in Nitrile
EN 598 / EN 15655 / CE Marking
NF Mark
Declaration of performances DoP-INTEGRAL005EN
Designed in accordance with applicable regulations:
- NF EN 476: general stipulations regarding components used in systems
- NF EN 752: design of sewerage projects
- NF EN 1610: acceptance of structures

Fitting a SUREJOINT gasket

When installing the SUREJOINT STARDARD Gasket:

Bend manually the joint to form a hart, having the connecting nozzle opposite of your hands.
Begin the gasket positioning in the socket groove by introducing the nozzle in a notch of the pipe front face.
Choose one notch on the upper section of pipe, in order that the nozzle remains accessible when in the trench.
Continue the joint installation as usual with Standard one.

User guide: Standard Gasket SUREJOINT Testing device

SUREJOINT quality check

The use of SUREJOINT Standard gasket, with the SUREJOINT Integral pipe, gives an immediate opportunity to check the integrity of the joint during installation. The check can detect any major defects during the jointing of the pipe, allowing any remedial work to be carried out straight away.

Checking of the joint is made by using the SUREJOINT testing device.

For full instructions of how to use SUREJOINT please refer to the Installation manual.