Laying instructions - Spare Parts for EURO20 New - Gate and body bonnet gasket replacement
Technical design
Technical design
| 40-50 | 0.3 | 283102 |
| 60-65 | 0.3 | 283104 |
| 80 | 0.3 | 283105 |
| 100 | 0.3 | 283106 |
| 125 | 0.3 | 283107 |
| 150 | 0.3 | 283108 |
| 200 | 0.3 | 283109 |
| 250 | 0.3 | 283110 |
| 300 | 1 | 283111 |
Features
Components
1 x body/bonnet gasket
body/bonnet fixing screws (quantities depending on model)
Installation steps
Before proceeding, ensure the installation is no longer under pressure.
1. Remove the protective wax from the body/bonnet connecting screws [2]
2. Unscrew the connecting screws [2]
3. Remove the cap [1] (the entire operating assembly and the wedge remain attached to the cap)
4. Remove the existing gasket [8]
5. Place the new gasket ensuring the screw holes are clear
6. Reinsert the cap assembly
7. Tighten the new screws, following the recommended torque values and tightening sequence for the model (see reverse)
See the video
Tightening of the body/bonnet bolts
| DN | Versions | Number of screws | Screw (connction bonnet) | Screw CHc (Nm)** | |||||
|---|---|---|---|---|---|---|---|---|---|
| C1 | C2 | C3 | C4 | C5 | C6 | ||||
| Dimensions | Screw 1-2 | Screw 3-4 | Screw 5-6 | Screw 7-8 | Screw 9-10 | Screw 11-12 | |||
| 40 | E20 New S15 & S15 | 4 | CHc M8x25 | 30 | 30 | ||||
| 50 | E20 New S15 & S15 | 4 | CHc M8x25 | 30 | 30 | ||||
| 60/65 | E20 New S15 & S15 | 4 | CHc M10x25 | 55 | 45 | ||||
| 80 | E20 New S15 & S15 | 4 | CHc M10x25 | 55 | 45 | ||||
| 100 | E20 New S15 & S15 | 4 | CHc M12x30 | 75 | 65 | ||||
| 125 | E20 New S15 & S15 | 4 | CHc M12x30 | 75 | 65 | ||||
| 150 | E20 New S15 & S15 | 6 | CHc M12x30 | 75 | 75 | 55 | |||
| 200 | E20 New S15 & S15 | 8 | CHc M12x35*** | 145-150 | 105-110 | 70-80 | 70-80 | ||
| 250 | E20 New S15 & S15 | 8 | CHc M14x40*** | 165-170 | 125-130 | 90-95 | 90-95 | ||
| 300 | E20 New S15 & S15 | 8 | CHc M16x40*** | 175-180 | 165-170 | 155-160 | 155-160 | ||
Documents
Documents
9 results
