TT PUX pipes DN150 to 2000 with STANDARD socket
Technical design
| 150 | 6.000 | C40 | 4.5 | 170.0 | 173.4 | 100.5 | 220.8 | 22.720 | SSB15Q60AH |
| 200 | 6.000 | C40 | 4.7 | 222.0 | 225.2 | 106.5 | 275.1 | 30.990 | SSB20Q60AH |
| 250 | 6.000 | C40 | 5.5 | 274.0 | 276.8 | 105.5 | 328.6 | 43.218 | SSB25Q60AH |
| 250 | 6.000 | C50 | 6.4 | 274 | 276.8 | 105.5 | 328.6 | 49.260 | SSB25D60AH |
| 300 | 6 | C40 | 6.2 | 326 | 328.8 | 107.5 | 385.3 | 56.625 | SSB30F60AH |
| 350 | 6.000 | C30 | 6.4 | 378.0 | 380.9 | 110.5 | 444.5 | 68.800 | SSB35G60AH |
| 400 | 6.000 | C30 | 6.5 | 429.0 | 431.9 | 112.5 | 494.6 | 79.400 | SSB40G60AH |
| 450 | 6.000 | C30 | 6.9 | 480.0 | 483.0 | 115.5 | 546.5 | 93.800 | SSB45G60AH |
| 500 | 6.000 | C30 | 7.5 | 532.0 | 535.0 | 117.5 | 600.9 | 111.100 | SSB50G60AH |
| 500 | 6.000 | C40 | 9.3 | 532.0 | 535 | 117.5 | 600.9 | 133.000 | SSB50F60AH |
| 600 | 6.000 | C30 | 8.7 | 635.0 | 638.1 | 132.5 | 712.0 | 150.600 | SSB60G60AH |
| 700 | 6.960 | C25 | 8.8 | 738 | 741.7 | 192.0 | 821.9 | 189.676 | SSB70H70AH |
| 800 | 6.950 | C25 | 9.6 | 842 | 845.8 | 197.0 | 935.6 | 232.964 | SSB80H70AH |
| 900 | 6.950 | C25 | 10.6 | 945 | 948.9 | 200.0 | 1043.4 | 283.583 | SSB90H70AH |
| 1000 | 6.960 | C25 | 11.6 | 1048 | 1052.0 | 203.0 | 1152.4 | 338.907 | SSC10H70AH |
| 1100 | 8.190 | C25 | 12.6 | 1152 | 1155.1 | 225.0 | 1263.7 | 400.757 | SSC11H80AH |
| 1200 | 8.190 | C25 | 13.6 | 1255 | 1260.0 | 235.0 | 1373.7 | 467.184 | SSC12H80AH |
| 1400 | 8.170 | C25 | 15.7 | 1462 | 1467.9 | 245.0 | 1592.1 | 641.175 | SSC14H80AH |
| 1500 | 8.160 | C25 | 16.7 | 1565 | 1571.1 | 265.0 | 1709.8 | 727.635 | SSC15H80AH |
| 1600 | 8.160 | C25 | 17.7 | 1668 | 1674.2 | 265.0 | 1815.9 | 815.319 | SSC16H80AH |
| 1800 | 8.150 | C25 | 19.7 | 1875 | 1881.5 | 275.0 | 2032.2 | 1003.828 | SSC18H80AH |
| 2000 | 8.130 | C25 | 21.8 | 2082 | 2088.8 | 290.0 | 2259.0 | 1219.779 | SSC20H80AH |
Features
Legend:
-
DN: nominal diameter
-
Lu: laying length, in m
-
Class: pressure class according to EN 545 and ISO 2531
-
e: nominal thickness according to ISO 2531, in mm
-
ØDE: external nominal diameter of the barrel according to EN 545 and ISO 2531, in mm
-
ØDI: internal nominal diameter of the socket, in mm
-
P: nominal depth of the socket, in mm
-
ØB: nominal diameter of the socket, in mm
-
Mass: total mass per metre (including cement coating and socket), determined with the nominal thickness, in kg/m
-
Reference: commercial reference Saint-Gobain PAM
Field of use:
-
For drinking water networks and other water networks (except sewage water)
-
For high corrosive soils, industrial pollution zones
Main characteristics:
- Pressure class in conformity with Standard EN 545-2010 and ISO 2531-2009
- External coating: polyurethane coating (900 microns) on the barrel, red-brown epoxy (300 microns) on spigot end and inside socket - conformity to EN 14901 and EN 15189
- Internal coating: sulfate resisting blast furnace cement mortar
- Standard joint in alimentary elastomer EPDM (ACS, KTW, WRAS,…)
Available anchoring joints in the range DN700 to 2000:
Pipes Class C can be anchored. Please refer to below information:
| DN |
Anchoring joints |
|---|---|
| DN700 to 1200 | STANDARD Ve anchoring system |
| DN700 to 1600 | UNIVERSAL Ve anchoring system |
|
DN1400 to 2000 |
PAMLOCK anchoring system. |
Gel-based lubricant for assembling pipes, collars, and fittings in pressure and sewerage systems. Available in 500g, 800g, and 2.5kg packages.
NATURAL, INTEGRAL and PLUVIAL ranges
For the following joints : Standard, Standard Vi, Universal Vi, Tyton, Tyton Vi and ViLok
The STANDARD gasket is compatible with the whole STANDARD sockets for pipes and fittings from water and irrigation ranges.
The STANDARD gasket is a push-on joint. The watertightness is made by the compression of the elastomer gasket which operates during the assembling by the introduction of the spigot end inside the socket.
The anchored STANDARD Vi gasket (with inserts) has the same shape than the STANDARD gasket, and fits the same socket. The STANDARD Vi gasket has inserts which anchor the socket joint by hooking into the pipe spigot (or the fitting) after the assembling.