URBITAL BioZinalium pipes with notches (CONTROL+) DN150 to 300 with STANDARD socket
Technical design
| 150 | 6 | C40 | 4.5 | 170 | 173.4 | 100.5 | 220.8 | 22.05 | SSB15Q60ADMV |
| 200 | 6 | C40 | 4.7 | 222 | 225.2 | 106.5 | 275.1 | 30.12 | SSB20Q60ADMV |
| 200 | 6 | C50 | 5.4 | 222 | 225.2 | 106.5 | 275.1 | 33.5 | SSB20D60ADMV |
| 250 | 6 | C40 | 5.5 | 274 | 276.8 | 105.5 | 328.6 | 42.15 | SSB25Q60ADMV |
| 250 | 6 | C50 | 6.4 | 274 | 276.8 | 105.5 | 328.6 | 47.32 | SSB25D60ADMV |
| 300 | 6 | C40 | 6.2 | 326 | 328.8 | 107.5 | 385.3 | 55.35 | SSB30F60ADMV |
| 300 | 6 | C50 | 7.4 | 326 | 328.8 | 107.5 | 385.3 | 63.85 | SSB30D60ADMV |
Features
Legend:
-
DN: nominal diameter
-
Lu: laying length, in m
-
Class: pressure class according to EN 545 and ISO 2531
-
e: nominal thickness according to ISO 2531, in mm
-
ØDE: external nominal diameter of the barrel according to EN 545 and ISO 2531, in mm
-
ØDI: internal nominal diameter of the socket, in mm
-
P: nominal depth of the socket, in mm
-
ØB: nominal diameter of the socket, in mm
-
Mass: total mass per metre (including cement coating and socket), determined with the nominal thickness, in kg/m
-
Reference: commercial reference Saint-Gobain PAM
Field of use:
-
Transport and distribution of reuse water
Main characteristics:
- Pressure class in conformity with Standard EN 545-2010 and ISO 2531-2009
- External BioZinalium® coating consists of two layers:
- a layer of zinc-aluminium 85/15 alloy, enriched with copper, with a minimum surface density of 400g/m², applied by spraying molten metal onto the surface of the iron, using an electric arc spray gun, from ZnAl (Cu) alloy wire
- a protective layer of Aquacoat (semi-permeable), a water-based purple acrylic of average thickness 80 microns applied using a spray gun (RAL 4001)
- Internal coating: sulphate resisting blast furnace cement mortar
-
SUREJOINT Standard joint in alimentary elastomer EPDM (ACS, KTW, WRAS,…)
-
Vi anchoring without bolts
Fitting a SUREJOINT gasket
When installing the SUREJOINT STARDARD Gasket:
- Bend manually the joint to form a hart, having the connecting nozzle opposite of your hands.
- Begin the gasket positioning in the socket groove by introducing the nozzle in a notch of the pipe front face.
- Choose one notch on the upper section of pipe, in order that the nozzle remains accessible when in the trench.
- Continue the joint installation as usual with Standard one.
SUREJOINT quality check
The use of SUREJOINT Standard gasket, with the SUREJOINT Natural pipe, gives an immediate opportunity to check the integrity of the joint during installation. The check can detect any major defects during the jointing of the pipe, allowing any remedial work to be carried out straight away.
Checking of the joint is made by using the SUREJOINT testing device.
For full instructions of how to use SUREJOINT please refer to the Installation manual.
Documents
The SUREJOINT STANDARD gasket is a push-FIT joint. Water tightness is achieved by the compression of the elastomer gasket during installation as the spigot of the next pipe is introduced into the socket.
The STANDARD gasket is compatible with the whole STANDARD sockets for pipes and fittings from water and irrigation ranges.
The STANDARD gasket is a push-on joint. The watertightness is made by the compression of the elastomer gasket which operates during the assembling by the introduction of the spigot end inside the socket.
The anchored STANDARD Vi gasket (with inserts) has the same shape than the STANDARD gasket, and fits the same socket. The STANDARD Vi gasket has inserts which anchor the socket joint by hooking into the pipe spigot (or the fitting) after the assembling.
Gel-based lubricant for assembling pipes, collars, and fittings in pressure and sewerage systems. Available in 500g, 800g, and 2.5kg packages.
NATURAL, INTEGRAL and PLUVIAL ranges
For the following joints : Standard, Standard Vi, Universal Vi, Tyton, Tyton Vi and ViLok