Bend 90° (1/4) INTEGRAL with 2 sockets STANDARD
Technical design
| 90° | 80 | 91.5 | 85.0 | 101.0 | 167.5 | 7.9 | TSA80CA |
| 90° | 100 | 105.0 | 88.0 | 121.0 | 187.5 | 10.4 | TSB10CA |
| 90° | 150 | 152.5 | 94.0 | 173.0 | 241.0 | 18.7 | TSB15CA |
| 90° | 200 | 200.0 | 100.0 | 225.0 | 294.0 | 30 | TSB20CA |
| 90° | 250 | 252.0 | 105.0 | 277.0 | 351.0 | 50.6 | TSB25CA |
| 90° | 300 | 304.0 | 110.0 | 329.0 | 408.0 | 74.2 | TSB30CA |
| 90° | 350 | 390.0 | 110.0 | 381.4 | 464.3 | 109 | TSB35CA |
| 90° | 400 | 436.0 | 112.0 | 432.4 | 515.3 | 141 | TSB40CA |
| 90° | 450 | 482.0 | 115.5 | 483.5 | 573.0 | 144 | TSB45CA |
| 90° | 500 | 525.0 | 117.5 | 535.5 | 628.0 | 215 | TSB50CA |
| 90° | 600 | 624.0 | 132.5 | 638.6 | 737.0 | 311 | TSB60CA |
| 90° | 700 | 670.0 | 150.0 | 742.2 | 861.0 | 584 | TSB70CA |
| 90° | 800 | 735.0 | 160.0 | 846.3 | 972.0 | 696 | TSB80CA |
| 90° | 900 | 880.0 | 175.0 | 949.4 | 1080.0 | 800 | TSB90CA |
| 90° | 1000 | 1000.0 | 185.0 | 1052.5 | 1189.0 | 1461 | TSC10CA |
Features
Field of use:
-
Separate sewer system and combined sewer system
-
Application: gravity flow and rising main sewerage systems
-
Type of effluent: domestic wastewater and rainwater
-
For networks with rising main under pressure
-
For effluents between pH1 and pH13
Main characteristics:
- External and internal coating: red epoxy powder 250µm (PECR)
- Type of joint: Standard
- Standard Gasket in Nitrile
- EN 598 / CE Marking
- Declaration of performances DoP-INTEGRAL005EN
- Mark NF
- Designed according to the regulatory texts:
- NF EN 476: general prescriptions for components used in the networks
- NF EN 752: Conception of sewage projects
- NF EN 1610: Reception of the works
- CCTG: Fascicule 70 (sewage work)
Documents
The STANDARD gasket is a push-on joint. The water tightness is made by the compression of the elastomer gasket which operates during the assembling by the introduction of the spigot end inside the socket.
The anchored gasket ViLoK (with inserts) has the same shape than the STANDARD gasket, and fits the same socket. The gasket ViLoK has inserts which anchor the socket joint by hooking into the pipe spigot (or the fitting) after the assembling.
The STANDARD Ve joint is a push-on joint with a weld bead; the watertightness is made by the compression of the elastomer gasket which operates during the assembling by the introduction of the spigot end inside the socket. The anchoring is reinforced by the addition of a gland and of bolts.