ACCESSORIES
Elastomer Sleeve TT PE - Protection of joints of pipes and fittings
DN60 to 300
Product family
Accessories
Protection of joints of pipes and fittings DN60 to 300 for TT PE and TT PUX
Warning: in the case of pipes with anchored joints (Standard Vi, Universal Vi or Ve, Pamlock, Standard Ve) in salted area, the elastomer sleeve must be replaced by the heat-shrink collar.
Technical design
Technical design
| 80 | 0.22 | JSA80YAT |
| 100 | 0.28 | JSB10YAT |
| 125 | 0.32 | JSB12YAT |
| 150 | 0.36 | JSB15YAT |
| 200 | 0.47 | JSB20YAT |
| 250 | 0.57 | JSB25YAT |
| 300 | 0.67 | JSB30YAT |
Features
Working with the TT PE range
1- Check the chamfer at the spigot end.
2 -Slide the sleeve onto the pipe’s spigot. If necessary, use lubricant paste.
3- Socket the pipe and inspect the joint.
4- Fold back the sleeve.
5- Slide the sleeve over the socket to protect the joint.
Documents
Documents
4 results
