INTEGRAL Ductan BioZinalium pipes DN80 to 125 with STANDARD socket
Technical design
| 80 | 6.000 | 5.0 | 98 | 101.4 | 92.5 | 144.1 | 13.221 | 40 | TSA80E60TP |
| 100 | 6.000 | 5.0 | 118 | 121.4 | 94.5 | 166.9 | 13.221 | 40 | TSB10E60TP |
| 125 | 6.000 | 5.0 | 144 | 147.4 | 97.5 | 193.1 | 16.271 | 40 | TSB12S60TP |
Features
Legend:
-
DN: nominal diameter
-
Lu: laying length, in m
-
e: thickness according to EN598 + A1 – August 2009, in mm
-
ØDE: external nominal diameter of the barrel according to EN598 + A1 – August 2009, in mm
-
ØDI: internal nominal diameter of the socket, in mm
-
P: nominal depth of the socket, in mm
-
ØB: nominal diameter of the socket, in mm
-
Mass: total mass per meter (including cement coating and socket), determined with the nominal thickness, in kg/m
-
Reference: commercial reference Saint-Gobain PAM
Field of use:
-
Separate sewer system and combined sewer system
-
Application: gravity flow and rising main sewerage systems
-
Type of effluent: domestic wastewater and rainwater
-
Perfectly watertight
-
For effluents between pH4 and pH11
-
For the soils with 6 < pH < 9
-
Majority of the soils, except the acid peaty and polluted soils
-
Suitable for clay soils
-
Resistivity of the soils: see drawing
Main characteristics:
- External coating BioZinalium: a layer of zinc-aluminium alloy enriched with copper Zn85Al15 (Cu), with surface density of 400 g/m² covered with a protective red (RAL 3011) layer AQUACOAT 80 μm (mini average), without VOC and without BPA.
- Internal lining: ultramarine blue thermoplastic polymer DUCTAN – thickness 300 microns
- Socket coating: ultramarine blue DUCTAN
- Spigot coating: zinc-aluminium (Cu) 400 g/m² + red AQUACOAT 80 μm (mini average)
- Standard Gasket in Nitrile
- EN 598 / CE Marking
- Declaration of performances DoP-INTEGRAL005EN
- Designed in accordance with applicable regulations:
- NF EN 476: general stipulations regarding components used in systems
- NF EN 752: design of sewerage projects
- NF EN 1610: acceptance of structures
- CCTG: Fascicule 70 (sewage work)
Documents
The STANDARD gasket is a push-on joint. The water tightness is made by the compression of the elastomer gasket which operates during the assembling by the introduction of the spigot end inside the socket.
The anchored gasket ViLoK (with inserts) has the same shape than the STANDARD gasket, and fits the same socket. The gasket ViLoK has inserts which anchor the socket joint by hooking into the pipe spigot (or the fitting) after the assembling.
Gel-based lubricant for assembling pipes, collars, and fittings in pressure and sewerage systems. Available in 500g, 800g, and 2.5kg packages.
NATURAL, INTEGRAL and PLUVIAL ranges
For the following joints : Standard, Standard Vi, Universal Vi, Tyton, Tyton Vi and ViLok