INTEGRAL PUX pipes DN150 to 1200 with STANDARD socket
Technical design
| 150 | 6.000 | 5.0 | 4.0 | 170 | 173.4 | 100.5 | 242.0 | 40 | 24.491 | TSB15S60BH |
| 200 | 6.000 | 5.0 | 4.0 | 222 | 225.2 | 106.5 | 295.0 | 40 | 32.878 | TSB20S60BH |
| 250 | 6.000 | 5.3 | 4.0 | 274 | 276.8 | 105.5 | 352.0 | 38 | 42.103 | TSB25S60BH |
| 300 | 6.000 | 5.6 | 4.0 | 326 | 328.8 | 107.5 | 409.2 | 35 | 52.532 | TSB30S60BH |
| 350 | 6.000 | 6.0 | 5.0 | 378 | 380.9 | 110.5 | 444.5 | 32 | 66.367 | TSB35S60BH |
| 400 | 6.000 | 6.3 | 5.0 | 429 | 431.9 | 112.5 | 494.6 | 30 | 78.133 | TSB40S60BH |
| 450 | 6.000 | 6.7 | 5.0 | 480 | 483.0 | 115.5 | 546.5 | 29 | 92.400 | TSB45S60BH |
| 500 | 6.000 | 7.0 | 5.0 | 532 | 535.0 | 117.5 | 600.9 | 28 | 106.417 | TSB50S60BH |
| 600 | 6.000 | 7.7 | 5.0 | 635 | 638.1 | 132.5 | 712.0 | 26 | 137.917 | TSB60S60BH |
| 700 | 6.960 | 9.6 | 6.0 | 738 | 741.7 | 192.0 | 821.9 | 29 | 202.500 | TSB70E69BH |
| 800 | 6.950 | 10.4 | 6.0 | 842 | 845.8 | 197.0 | 935.6 | 28 | 243.600 | TSB80E69BH |
| 900 | 6.950 | 11.2 | 6.0 | 945 | 948.9 | 200.0 | 1043.4 | 27 | 295.900 | TSB90E69BH |
| 1000 | 6.960 | 12.0 | 6.0 | 1048 | 1052.0 | 203.0 | 1152.4 | 26 | 348.000 | TSC10E69BH |
| 1100 | 8.190 | 14.4 | 6.0 | 1152 | 1155.1 | 225.0 | 1263.7 | 29 | 440.000 | TSC11N79BH |
| 1200 | 8.190 | 15.3 | 6.0 | 1255 | 1260.0 | 235.0 | 1373.7 | 29 | 513.200 | TSC12N79BH |
Features
Legend:
-
DN : nominal diameter
-
Lu : laying length, in m
-
e: thickness according to EN598 + A1 – August 2009, in mm
-
er: thickness of the cement mortar, in mm
-
ØDE : external nominal diameter of the barrel according to EN598 + A1 – August 2009, in mm
-
ØDI : internal nominal diameter of the socket, in mm
-
P : nominal depth of the socket, in mm
-
ØB : nominal diameter of the socket, in mm
-
Mass : total mass per meter (including cement coating and socket), determined with the nominal thickness, in kg/m
-
Reference : commercial reference Saint-Gobain PAM
Field of use:
-
Separate sewer system and combined sewer system
-
Application: gravity flow and rising main sewerage systems
-
Type of effluent: domestic wastewater and rainwater
-
Perfectly watertight
-
For effluents between pH4 and pH12
-
Extremely corrosive soils
-
Resistivity of the soils:
Main characteristics:
- External coating: polyurethane according to EN 15189
- Internal lining: aluminous cement mortar CALCOAT
- Spigot and socket coating: reinforced red epoxy paint 300 microns (mini average)
- Standard Gasket in Nitrile
- EN 598 / EN 15189 / CE Marking
- Declaration of performances DoP-INTEGRAL005EN
- Designed in accordance with applicable regulations:
- NF EN 476: general stipulations regarding components used in systems
- NF EN 752: design of sewerage projects
- NF EN 1610: acceptance of structures
Documents
The STANDARD gasket is a push-on joint. The water tightness is made by the compression of the elastomer gasket which operates during the assembling by the introduction of the spigot end inside the socket.
Gel-based lubricant for assembling pipes, collars, and fittings in pressure and sewerage systems. Available in 500g, 800g, and 2.5kg packages.
NATURAL, INTEGRAL and PLUVIAL ranges
For the following joints : Standard, Standard Vi, Universal Vi, Tyton, Tyton Vi and ViLok