IRRIGAL BioZinalium pipes DN150 to 600 with STANDARD socket
Technical design
| 150 | 6.000 | C40 | 4.5 | 170 | 173.4 | 100.5 | 220.8 | 22.15 | ISB15Q60AX |
| 200 | 6.000 | C40 | 4.7 | 222 | 225.2 | 106.5 | 275.1 | 30.2 | ISB20Q60AX |
| 250 | 6.000 | C40 | 5.5 | 274 | 276.8 | 105.5 | 328.6 | 42.22 | ISB25Q60AX |
| 300 | 6.000 | C40 | 6.2 | 326 | 328.8 | 107.5 | 385.3 | 55.55 | ISB30F60AX |
| 350 | 6.000 | C30 | 6.4 | 378 | 380.9 | 110.5 | 444.5 | 68.83 | ISB35G60AX |
| 400 | 6.000 | C30 | 6.5 | 429 | 431.9 | 112.5 | 494.6 | 79.4 | ISB40G60AX |
| 450 | 6.000 | C30 | 6.9 | 480 | 483.0 | 115.5 | 546.5 | 93.8 | ISB45G60AX |
| 500 | 6.000 | C30 | 7.5 | 532 | 535.0 | 117.5 | 600.9 | 111.15 | ISB50G60AX |
| 600 | 6.000 | C30 | 8.7 | 635 | 638.1 | 132.5 | 712.0 | 150.57 | ISB60G60AX |
Features
Legend:
-
DN: nominal diameter
-
Lu: laying length, in m
-
Class: pressure class according to EN 545 and ISO 2531
-
e: nominal thickness according to ISO 2531, in mm
-
ØDE: external nominal diameter of the barrel according to EN 545 and ISO 2531, in mm
-
ØDI: internal nominal diameter of the socket, in mm
-
P: nominal depth of the socket, in mm
-
ØB: nominal diameter of the socket, in mm
-
Mass: total mass per metre (including cement coating and socket), determined with the nominal thickness, in kg/m
-
Reference: commercial reference Saint-Gobain PAM
Field of use:
-
For irrigation networks
Main characteristics:
-
Pressure class in conformity with Standard EN 545-2010 and ISO 2531-2009
-
External BioZinalium® coating consists of : a layer of zinc-aluminium 85/15 alloy, enriched with copper, with a minimum surface density of 400g/m²), applied by spraying molten metal onto the surface of the iron, using an electric arc spray gun, from ZnAl (Cu) alloy wire and a protective layer of Aquacoat (semi-permeable), a water-based green acrylic of average thickness 80 microns applied using a spray gun (RAL 6011 to 6021)
-
Internal coating: sulphate resisting blast furnace cement mortar
-
Standard joint in alimentary elastomer EPDM (ACS, KTW, WRAS,…)
Documents
The STANDARD gasket is compatible with the whole STANDARD sockets for pipes and fittings from water and irrigation ranges.
The STANDARD gasket is a push-on joint. The watertightness is made by the compression of the elastomer gasket which operates during the assembling by the introduction of the spigot end inside the socket.
The anchored STANDARD Vi gasket (with inserts) has the same shape than the STANDARD gasket, and fits the same socket. The STANDARD Vi gasket has inserts which anchor the socket joint by hooking into the pipe spigot (or the fitting) after the assembling.
Gel-based lubricant for assembling pipes, collars, and fittings in pressure and sewerage systems. Available in 500g, 800g, and 2.5kg packages.
NATURAL, INTEGRAL and PLUVIAL ranges
For the following joints : Standard, Standard Vi, Universal Vi, Tyton, Tyton Vi and ViLok