BIOGAN

Multi material sleeve collars for gravity sewage network
DN150-300

Product family

Fittings

Technical design

Designation	Material
Body : External metal band	Stainless steel : 1.4404
Body : internal grey sleeve	PA6
Elastomeric sealing sleeve	NBR
Tension band with click locking	Stainless steel : 1.4404

For pipes connexion of gravity sewage network
Able to maintain the flow gravity in a lot of cases
For connexion of spigot-spigot ductile iron pipes or ductile iron and other material with or without the same external diameters included inside a large range of tolerances
Installation ‘’by advancement’’ (components one after the other) or repairing operation (sliding collar)
Fully sealed and waterproof
For aggressive effluents and maximal temperature of 70 ° C.
Resistant to oil, sea water and traces of hydrocarbons
Installation in all type of soils
Maximum angular deflection : 3° for each side of the collar

The collars are designed to accept large diameter ranges
Enhanced Durability
Designed in agreements with:
- EN 681-1 WC 60 : Elastomeric sealing sleeve
- DIN 4060 et DIN EN 295 : Collar Sealing
- Technical certificate : Dlbt Z.42-5450 (German Institute for building techniques)
- CCTG : French Fascicule 70 (installation for sewage network)

DN150 and 200 : packaging plastic bag, including lubricating paste and installation instructions in four languages (French, German, English, Polish)
DN250 and 300 : packaging in cardboard box, including lubricating paste and installation instructions in four languages (French, German, English, Polish)

Torque setting:

Nominal diameter of collar	100 - 270 mm	290 - 590 mm
Torque on tangential spanner	-	17 Nm
Torque on the tensions sleeves	17 Nm	9 Nm

External pipes diameters (for information only):

Type of pipe	Standard	Collar DN150	Collar DN200	Collar DN250	Collar DN300
Type of pipe	Standard	160 → 192 mm	200 → 261 mm	250 → 324 mm	313 → 382 mm
Ductile iron	EN 598	170 mm	222 mm	274 mm	326 mm
Clay pipes C 160	EN 295	186 mm	242 mm	299 mm	355 mm
Clay pipes C 240	EN 295	-	254 mm	318 mm	376 mm
PVC-U	EN 1401	160 mm	200 mm E	250 mm E	315 mm
PP-MD	EN 14758	160 mm	200 mm E	250 mm E	315 mm
PP	EN 1852	160 mm	200 mm E	250 mm E	315 mm
PVC-U/PP/PE	EN 13476	170 mm	225 mm	280 mm	335 mm
HDPE	EN 12666	160 mm	200 mm E	250 mm E	315 mm
GRP	EN 14364	167 mm	220 mm	272 mm	324 mm

Torque wrench (reference 242242) to assembly the tensions sleeves DN150, 200, 250 et 300
Set of accessories in a kit box (reference 242244). Contains all the tools for tightening and assembly of the full range of collars
Tangential spanner (reference 242243). Greatly facilitates mounting (for DN300 only)