Technical design
| 200 | 150 | 246 | 150 | 193 | Ductile iron junction | 3.71 | TJB20PM0J |
| 200 | 160 | 246 | 150 | 193 | PVC junction | 3.75 | TJB20PM0X |
Features
Field of use:
-
Separate sewer system
-
Application: gravity flow
-
Type of effluent: wastewater
-
Lastingly leak tight and impermeable
-
Laying in all types of soils
-
For effluents between pH1 and pH13
Main characteristics:
- IM Gasket in Nitrile
- Fittings and joints are supplied in red-brown polyethylene bag
- Tested according to the functional requirements of EN 598
- Designed according to the normative and regulatory texts:
- NF EN 476: general prescriptions for components used in the networks
- NF EN 752: Conception of sewage projects
- NF EN 1610: Reception of the works
- CCTG: Fascicule 70 (sewage work)
Material and coating:
| Item | Designation | Material |
|---|---|---|
| 1 | Body | Organic material reinforced with fiberglass |
| 2 | IM seal | Nitrile rubber |
| 3 | Stirrup | Galvanised steel + red epoxy |
| 4 | Centering ring | Organic material reinforced with fiberglass |
| 5 | O ring DN14 | Nitrile rubber |
Important :
To guarantee the sealing of 2 bars according to the standard EN 598, it is imperative to use the assembly with the clamp with round cutting.
Note: on INTEGRAL pipes, please realize a rectangular cutting.
According to the cutting angle of the slicer, while following the provided gauge of cutting, it is possible that the cement thickness reduces the opening width necessary to have a good sealing. This opening must be measured and does not be lower than 170mm; otherwise, it will be necessary to break the cement to reach the good dimension.
Reminder: on BIOGAN pipes or on INTEGRAL pipes, the saddle must be in contact with the pipe after tightening in order to have a good sealing.
Documents
