TT PUX pipes DN700 to 1600 with UNIVERSAL STANDARD socket + Weld bead Ve
Technical design
| 700 | 6.900 | C30 | 10.8 | 738 | 741.7 | 250.0 | 855 | 158 | 227 | SFB70G70AH |
| 800 | 6.900 | C30 | 11.7 | 842 | 845.8 | 261.0 | 980 | 150 | 281.9 | SFB80N70AH |
| 900 | 6.900 | C30 | 12.6 | 945 | 948.9 | 280.0 | 1087 | 155 | 348.7 | SFB90N70AH |
| 1000 | 6.900 | C30 | 13.5 | 1048 | 1052.0 | 279.5 | 1191 | 165 | 403.2 | SFC10N70AH |
| 1100 | 8.13 | C30 | 14.7 | 1152 | 1168 | 284 | 1317.8 | 165 | 467.3 | SFC11G80AH |
| 1200 | 8.150 | C25 | 15.3 | 1255 | 1260.0 | 279.5 | 1415 | 170 | 521.4 | SFC12N80AH |
| 1200 | 8.150 | C30 | 16.5 | 1255 | 1260.0 | 279.5 | 1415 | 170 | 560 | SFC12G80AH |
| 1400 | 8.090 | C25 | 17.1 | 1462 | 1468.5 | 330.0 | 1640.1 | 190 | 713.1 | SFC14H80AH |
| 1600 | 8.09 | C25 | 17.7 | 1668 | 1674.2 | 330 | 1874 | 195 | 858.1 | SFC16H80AH |
Features
Legend:
-
DN: nominal diameter
-
Lu: laying length, in m
-
Class: pressure class according to EN 545 and ISO 2531
-
e: nominal thickness according to ISO 2531, in mm
-
ØDE: external nominal diameter of the barrel according to EN 545 and ISO 2531, in mm
-
ØDI: internal nominal diameter of the socket, in mm
-
P: nominal depth of the socket, in mm
-
ØB: nominal diameter of the socket, in mm
-
c: weld bead position, in mm
-
Mass: total mass per metre (including cement coating and socket), determined with the nominal thickness, in kg/m
-
Reference: commercial reference Saint-Gobain PAM
Field of use:
-
For drinking water networks and other water networks (except sewage water)
-
For high corrosive soils, industrial pollution zones
Main characteristics:
- Pressure class in conformity with Standard EN 545-2010 and ISO 2531-2009
- External coating: polyurethane coating (900 microns) on the barrel, red-brown epoxy (300 microns) on spigot end and inside socket - conformity to EN 14901 and EN 15189
- Internal coating: sulfate resisting blast furnace cement mortar
- Standard joint in alimentary elastomer EPDM (ACS, KTW, WRAS,…)
Documents
Gel-based lubricant for assembling pipes, collars, and fittings in pressure and sewerage systems. Available in 500g, 800g, and 2.5kg packages.
NATURAL, INTEGRAL and PLUVIAL ranges
For the following joints : Standard, Standard Vi, Universal Vi, Tyton, Tyton Vi and ViLok
The STANDARD UNIVERSAL VE joint is the assembly of a standard push on joint and a standard universal anchoring ring with weld bead.
The STANDARD gasket is compatible with the whole STANDARD sockets for pipes and fittings from water and irrigation ranges.
The STANDARD gasket is a push-on joint. The watertightness is made by the compression of the elastomer gasket which operates during the assembling by the introduction of the spigot end inside the socket.
