C9+

Fire hydrant C9+ Traffic DN100 - BS outlets

Application

Fire Safety

Product family

Hydrants

Operating square cap 30x30mm
Bended valve box
Automatic drainage function
Outlets: 2 lateral outlets BS336 and 1 frontal outlet BS336

Technical design


100	Bended box	2x BS336 2"½ DN 65 + 1x 4" DN100	1006	2050	643	538	1175	152	100 x 90	83	182101
100	Straight box	2x BS336 2"½ + 1x BS336 4"	1250	2278	643	538	1438	180	200 x 200	101	*

Features

Field of use

Fire hydrants pillar or underground type are designed, according to applicable standards and regulations, for exclusive use of fire protection and using drinking water or raw water network.

They must be handled and used in strict compliance with the recommendations and best practice by personnel trained with these recommendations.

These devices must be inspected periodically (as required by regulations or recommended instructions) to verify and maintain their proper and safe operation.

Material and coating

Item	Designation	Material	Coating
1	1a -Operating cap	Ductile iron GS EN GJS 400-15 or 500-7 EN 1563	Dacromet + grey Polyurethane 20 µm
	1c -Upper body	Ductile iron GS EN GJS 400-15 or 500-7 EN 1563	Red-brown Epoxy powder 250 µm + red Polyurethane 40 µm
	1f – Lower Body	Ductile iron GS EN GJS 400-15 or 500-7 EN 1563	Epoxy powder 250 µm + red Polyurethane 40 µm
	1 g – Screwed box	Ductile iron GS EN GJS 400-15 or 500-7 EN 1563	Epoxy powder 250 µm + red Polyurethane 40 µm
	1d-Extension tube	Ductile iron GS EN GJS 400-15 or 500-7 EN 1563	Blue Epoxy powder 250 µm
	1e -Valve box	Ductile iron GS EN GJS 400-15 or 500-7 EN 1563	Blue Epoxy powder 250 µm
	1b- Cover	Polyamide P A 6	Red polyurethane paint
2	Upper and lower bush	Brass type Cu Zn 39 Pb 2EN 12164
3	Operating stem	Steel type X20 Cr 13 EN 10088-3
4	Operating nut	Brass type Cu Zn 40 Pb 2 EN 12164
5	Fixing screw	Steel type CL 8/8	Bichromated zinc
6	Operating rod	Steel type Tu 56 B NF EN 10240	Galvanized
7	Valve	Ductile iron GS EN GJS 400-15 or 500-7 EN 1563	Encapsulated EPDM
8	Outlets	Depending on models
9	Operating shaft	X20 Cr 13 EN 10088-1
10	Pin	X20 Cr 13 EN 10088-1
11	Operating spindle	(OS) Forged steel C35 - NF EN 10083-1	25 microns black cataphoresis
12	Bolts and nuts	Steel type CL 8/8	Bichromated zinc
13	Breakable traffic clamping shim	Ductile iron	250 microns fusion bonded blue epoxy + red polyurethane

Notice NPPI 01 A

Mechanical characteristics

According to NF EN 14384/CN
PFA 16 bars (hydraulics test: According to ISO 5208)
Opening-closing torque bellow 80 Nm
Maximum strength torque above 300 Nm
Resistance to 1000 cycles opening/closing
Number of turns to close: 13
Nominal flow rate 60m3/h for headloss 1 m. water column
Flow curve for PI C9+ DN100 (with headloss 1 bar:10 m. water column) according to the numbers of turns opening