INTEGRAL TT PE pipes DN150 to 1000 with STANDARD socket
Technical design
| 150 | 6.000 | 5.0 | 4.0 | 2.0 | 170 | 173.4 | 100.5 | 222.0 | 24.800 | 40 | TSB15S60BG |
| 200 | 6.000 | 5.1 | 4.0 | 2.0 | 222 | 225.2 | 106.5 | 279.0 | 33.300 | 40 | TSB20S60BG |
| 250 | 6.000 | 5.3 | 4.0 | 2.0 | 274 | 276.8 | 105.5 | 334.0 | 42.600 | 38 | TSB25S60BG |
| 300 | 6.000 | 5.6 | 4.0 | 2.2 | 326 | 328.8 | 107.5 | 392.0 | 53.300 | 35 | TSB30S60BG |
| 350 | 6.000 | 6.0 | 5.0 | 2.2 | 378 | 380.9 | 110.5 | 446.0 | 69.300 | 32 | TSB35S60BG |
| 400 | 6.000 | 6.3 | 5.0 | 2.2 | 429 | 431.9 | 112.5 | 499.5 | 81.300 | 30 | TSB40S60BG |
| 450 | 6.000 | 6.7 | 5.0 | 2.2 | 480 | 483.0 | 115.5 | 554.0 | 95.700 | 29 | TSB45S60BG |
| 500 | 6.000 | 7.0 | 5.0 | 2.5 | 532 | 535.0 | 117.5 | 608.6 | 111.400 | 28 | TSB50S60BG |
| 600 | 6.000 | 7.7 | 5.0 | 2.5 | 635 | 638.0 | 132.5 | 718.0 | 141.800 | 26 | TSB60S60BG |
| 700 | 6.960 | 9.6 | 6.0 | 2.5 | 738 | 741.7 | 192.0 | 830.0 | 211.03 | 29 | TSB70E70BG |
| 800 | 6.950 | 10.4 | 6.0 | 3.0 | 842 | 845.8 | 197.0 | 935.6 | 258.74 | 28 | TSB80E70BG |
| 900 | 6.950 | 11.2 | 6.0 | 3.0 | 945 | 948.9 | 200.0 | 1043.4 | 308.61 | 27 | TSB90E70BG |
| 1000 | 6.960 | 12.0 | 6.0 | 3.0 | 1048 | 1052.0 | 203.0 | 1152.4 | 362.5 | 26 | TSC10E70BG |
Features
Legend:
-
DN : nominal diameter
-
Lu : laying length, in m
-
e: thickness according to EN598 + A1 – August 2009, in mm
-
e1: according to EN14626, in mm
-
er: thickness of the cement mortar, in mm
-
ØDE : external nominal diameter of the barrel according to EN598 + A1 – August 2009, in mm
-
ØDI : internal nominal diameter of the socket, in mm
-
P : nominal depth of the socket, in mm
-
ØB : nominal diameter of the socket, in mm
-
Mass : total mass per meter (including cement coating and socket), determined with the nominal thickness, in kg/m
-
Reference : commercial reference Saint-Gobain PAM
Field of use:
-
Separate sewer system and combined sewer system
-
Application: gravity flow and rising main sewerage systems
-
Type of effluent: domestic wastewater and rainwater
-
Perfectly watertight
-
For effluents between pH4 and pH12
-
Extremely corrosive soils ; storage in warm countries is not recommended
-
Resistivity of the soils: see drawing
Main characteristics:
-
External coating BioZinalium: a layer of zinc-aluminium alloy enriched with copper Zn85Al15 (Cu), with surface density of 400 g/m² covered with a protective red (RAL 3011) layer AQUACOAT 80 μm (mini average), without VOC and without BPA polyethylene according to NF EN 14628-2006 (DN80 to 500: extrusion method by tubing – DN500 to 700: extrusion method by wrapping)
-
Internal lining: aluminous cement mortar CALCOAT
-
Socket coating: zinc rich paint 40 μm or zinc-aluminium 200 g/m² + red AQUACOAT 160 μm (mini average)
-
Spigot coating: zinc-aluminium (Cu) 400 g/m² + red AQUACOAT 160 μm (mini average)
-
Standard Gasket in Nitrile
-
EN 598 / CE Marking
-
Declaration of performances DoP-INTEGRAL005EN
- Designed in accordance with applicable regulations:
- NF EN 476: general stipulations regarding components used in systems
- NF EN 752: design of sewerage projects
- NF EN 1610: acceptance of structures
Documents
The STANDARD gasket is a push-on joint. The water tightness is made by the compression of the elastomer gasket which operates during the assembling by the introduction of the spigot end inside the socket.
Gel-based lubricant for assembling pipes, collars, and fittings in pressure and sewerage systems. Available in 500g, 800g, and 2.5kg packages.
NATURAL, INTEGRAL and PLUVIAL ranges
For the following joints : Standard, Standard Vi, Universal Vi, Tyton, Tyton Vi and ViLok
The installation must be done in a clean and dry environment.
Necessary equipment to install the aluminium sleeve
- Aluminium adhesive tape width 75mm
- Tool (in wood) for the completions
- Gas-burner