Kit Universal Standard TT PE Pipe + Universal Standard Vi Joint
Technical design
Technical design
Angular deflection
| 80 | C100 | 3 | 60 | SGA80N60AG-E06 |
| 100 | C100 | 3 | 56 | SGB10N60AG-E06 |
| 125 | C64 | 3 | 52 | SGB12N60AG-E06 |
| 150 | C64 | 3 | 48 | SGB15N60AG-E06 |
| 200 | C64 | 3 | 43 | SGB20N60AG-E06 |
| 250 | C50 | 3 | 39 | SGB25N60AG-E06 |
| 300 | C50 | 3 | 34 | SGB30N60AG-E06 |
| 350 | C40 | 3 | 25 | SGB35N60AG-E06 |
| 400 | C40 | 3 | 20 | SGB40N60AG-E06 |
| 450 | C40 | 3 | 16 | SGB45N60AG-E06 |
| 500 | C40 | 2 | 16 | SGB50N60AG-E06 |
| 600 | C40 | 2 | 16 | SGB60N60AG-E06 |
| 700 | C30 | 2 | 10 | SGB70G70AG-E06 |
Features
- DN60 to 300 : Reference pipe + joint + Elastomer Sleeve
- DN350 to 700 : Reference pipe + joint + Heat-shrink Collar
Documents
Documents
6 results
The STANDARD UNIVERSAL VI gasket is a push-on joint with metallic inserts found inside the locked ring.
The installation must be done in a clean and dry environment.
Necessary equipment to install the aluminium sleeve
- Aluminium adhesive tape width 75mm
- Tool (in wood) for the completions
- Gas-burner
Protection of joints of pipes and fittings DN60 to 300 for TT PE and TT PUX
Warning: in the case of pipes with anchored joints (Standard Vi, Universal Vi or Ve, Pamlock, Standard Ve) in salted area, the elastomer sleeve must be replaced by the heat-shrink collar.
DN
80 to 300
,
Protection of joints of pipes and fittings DN80 to 700
DN
80 to 700
Type
MPSM-C30-UNIV-300-DN150 to MPSM-C30-UNIV-300-DN80