Manhole collar with Standard Joint DN150-2000 (for connection to
concrete manhole)
Product family
Fittings
Technical design
Technical design
Type A
| 150 | A | 173.0 | 90 | 10 | 100 | 256 | 154 | 65 | 5.01 | TSB15MS |
| 200 | A | 225.0 | 90 | 10 | 100 | 309 | 204 | 64.5 | 6.43 | TSB20MS |
| 250 | A | 277.0 | 100 | 10 | 110 | 362 | 255 | 74 | 8.66 | TSB25MS |
| 300 | A | 329.0 | 100 | 10 | 110 | 417 | 306 | 74 | 10.39 | TSB30MS |
| 350 | A | 381.0 | 100 | 10 | 110 | 473 | 356 | 74 | 13.1 | TSB35MS |
| 400 | A | 432.0 | 100 | 10 | 110 | 525 | 406 | 74 | 14.73 | TSB40MS |
| 450 | A | 481.0 | 102 | 10 | 112 | 579 | 465 | 62 | 25 | TSB45MS |
| 500 | A | 533.0 | 100 | 10 | 110 | 632 | 515 | 64 | 21.44 | TSB50MS |
| 600 | A | 636.0 | 110 | 10 | 120 | 738 | 615 | 66 | 26.7 | TSB60MS |
| 700 | A | 739.5 | 150 | 10 | 160 | 845 | 720 | 105 | 37.08 | TSB70MS |
| 800 | A | 843.5 | 150 | 10 | 160 | 950 | 820 | 106 | 53 | TSB80MS |
| 900 | A | 946.5 | 165 | 10 | 175 | 1055 | 925 | 118 | 63.21 | TSB90MS |
| 1000 | A | 1049.5 | 175 | 10 | 185 | 1160 | 1025 | 130 | 73.51 | TSC10MS |
| 1200 | B | 1256.6 | 195 | 220 | 415 | 1530 | 1200 | 150 | 421 | TSC12MS |
| 1400 | A | 1463.6 | 255 | 25 | 280 | 1755 | 1411 | 150 | 385 | TSC14MS |
| 1500 | B | 1570.0 | 280 | 75 | 355 | 1900 | 1477 | 150 | 568 | TSC15MS |
| 1600 | A | 1669.6 | 275 | 25 | 300 | 1975 | 1613 | 150 | 477 | TSC16MS |
| 1800 | A | 1876.6 | 258 | 62 | 320 | 2195 | 1827 | 150 | 612 | TSC18MS |
| 2000 | A | 2083.6 | 290 | 50 | 340 | 2425 | 2030 | 150 | 980 | TSC20MS |
Features
Field of use:
-
Separate sewer system and combined sewer system
-
Application: gravity flow
-
Type of effluent: domestic wastewater and rainwater
-
Lastingly leak tight and impermeable
-
For effluents between pH1 and pH13
Main characteristics:
- External and internal coating: red epoxy powder 250µm (PECR)
- EN 598 / CE Marking
- Declaration of performances DoP-INTEGRAL005EN
- Mark NF
- Designed according to the regulatory texts:
- NF EN 476: general prescriptions for components used in the networks
- NF EN 752: Conception of sewage projects
- NF EN 1610: Reception of the works
- CCTG: Fascicule 70 (sewage work)
- External surface not coated for a better adhesion Ductile Iron-Concrete
Material and coating:
| Designation | Material | Coatings | Packing |
|---|---|---|---|
| Body | Ductile Iron | Outside (except anchoring part in contact with the concrete: not coated) + Inside: 250µ Epoxy powder red-brown RAL 3009 | Supplied in red-brown polyethylene bag |
| Standard Joint | Nitrile Rubber |
Documents
Documents
9 results
The STANDARD gasket is a push-on joint. The water tightness is made by the compression of the elastomer gasket which operates during the assembling by the introduction of the spigot end inside the socket.
DN
80 to 2000