DIREXIONAL INT TT PE pipes DN150 to 700 with UNIVERSAL STANDARD socket + Weld bead Ve
Technical design
| 150 | 5.970 | 6.2 | 2.0 | 170 | 173.4 | 148 | 230 | 95 | 29.900 | 60 | TIB15N60BG |
| 200 | 5.970 | 6.5 | 2.0 | 222 | 225.2 | 155 | 290 | 100 | 41.300 | 52 | TIB20N60BG |
| 250 | 5.970 | 6.8 | 2.0 | 274 | 276.8 | 166 | 350 | 110 | 53.800 | 46 | TIB25N60BG |
| 300 | 5.970 | 7.4 | 2.2 | 326 | 328.8 | 180 | 408 | 115 | 69.500 | 41 | TIB30N60BG |
| 350 | 5.970 | 7.7 | 2.2 | 378 | 380.9 | 184 | 463 | 115 | 85.900 | 38 | TIB35N60BG |
| 400 | 5.970 | 8.1 | 2.2 | 429 | 431.9 | 176 | 510 | 113 | 100.900 | 35 | TIB40N60BG |
| 450 | 5.970 | 8.6 | 2.2 | 480 | 483.0 | 190 | 570 | 120 | 120.400 | 32 | TIB45N60BG |
| 500 | 5.970 | 9.3 | 2.5 | 532 | 535.0 | 200 | 625 | 125 | 143.000 | 30 | TIB50N60BG |
| 600 | 5.970 | 10.9 | 2.5 | 635 | 638.2 | 209 | 740 | 135 | 192.900 | 30 | TIB60N60BG |
| 700 | 5.970 | 10.8 | 2.5 | 738 | 741.7 | 250 | 855 | 158 | 234.900 | 27 | TIB70N60BG |
Features
Legend
-
DN: nominal diameter
-
Lu: laying length, in m
-
e: nominal thickness according to EN 598 + A1-2009, in mm
-
e1: according to EN14628-2006, in mm
-
ØDE: external nominal diameter of the barrel, in mm
-
ØDI: internal nominal diameter of the socket, in mm
-
P: nominal depth of the socket, in mm
-
ØB: nominal diameter of the socket, in mm
-
c: weld bead position, in mm
-
Mass: total mass per meter (including cement coating and socket), determined with the nominal thickness, in kg/m
-
Reference: commercial reference Saint-Gobain PAM
Field of use:
-
Separate sewer system and combined sewer system
-
Application: rising main sewerage systems and trenchless pipe laying
-
Type of effluent: domestic wastewater and rainwater
-
Perfectly watertight
-
For effluents between pH4 and pH12
-
Extremely corrosive soils
-
Protection of the joints with elastomer collar (DN100-300 - DN350-700 - DN800-1000) and HDD metal cones
-
Adapted for trenchless pipe laying (horizontal direction drilling and pipe bursting)
-
Resistivity of the soils: please refer to drawing
Main characteristics:
- Elastomer quality: NBR
- External coating:
- on the barrel: zinc 200 g/m² + polyethylene according to NF EN 14628-2006,
- on the spigot: zinc rich paint 40 μm + red epoxy 200 μm
- Internal coating: aluminous cement mortar CALCOAT
- Conformity to EN 598 and ISO 7186
Documents
The STANDARD UNIVERSAL VE joint is the assembly of a standard push on joint and a standard universal anchoring ring with weld bead.
The STANDARD gasket is a push-on joint. The water tightness is made by the compression of the elastomer gasket which operates during the assembling by the introduction of the spigot end inside the socket.
Gel-based lubricant for assembling pipes, collars, and fittings in pressure and sewerage systems. Available in 500g, 800g, and 2.5kg packages.
NATURAL, INTEGRAL and PLUVIAL ranges
For the following joints : Standard, Standard Vi, Universal Vi, Tyton, Tyton Vi and ViLok
The installation must be done in a clean and dry environment.
Necessary equipment to install the aluminium sleeve
- Aluminium adhesive tape width 75mm
- Tool (in wood) for the completions
- Gas-burner
Protection of joints of pipes and fittings DN60 to 300 for TT PE and TT PUX
Warning: in the case of pipes with anchored joints (Standard Vi, Universal Vi or Ve, Pamlock, Standard Ve) in salted area, the elastomer sleeve must be replaced by the heat-shrink collar.
,
Protection of joints of pipes and fittings DN80 to 700
Protection of joints of pipes and fittings DN150 to 2000
