Kit Standard TT PE Pipe with notches + Standard SUREJOINT (CONTROL+) Gasket
Technical design
Technical design
Angular deflection
| 150 | C40 | 5 | 40 | SSB15Q60AGV-E07 |
| 200 | C40 | 5 | 40 | SSB20Q60AGV-E07 |
| 250 | C40 | 5 | 40 | SSB25Q60AGV-E07 |
| 300 | C40 | 5 | 40 | SSB30F60AGV-E07 |
| 350 | C30 | 4 | 30 | SSB35G60AGV-E07 |
| 400 | C30 | 4 | 30 | SSB40G60AGV-E07 |
| 450 | C30 | 4 | 30 | SSB45G60AGV-E07 |
| 500 | C30 | 4 | 30 | SSB50G60AGV-E07 |
| 600 | C30 | 4 | 30 | SSB60G60AGV-E07 |
Features
- DN60 to 300 : Reference pipe + joint + Elastomer Sleeve
- DN350 to 700 : Reference pipe + joint + Heat-shrink Collar
Documents
Documents
8 results
The SUREJOINT STANDARD gasket is a push-FIT joint. Water tightness is achieved by the compression of the elastomer gasket during installation as the spigot of the next pipe is introduced into the socket.
DN
100 to 600
The installation must be done in a clean and dry environment.
Necessary equipment to install the aluminium sleeve
- Aluminium adhesive tape width 75mm
- Tool (in wood) for the completions
- Gas-burner
Protection of joints of pipes and fittings DN60 to 300 for TT PE and TT PUX
Warning: in the case of pipes with anchored joints (Standard Vi, Universal Vi or Ve, Pamlock, Standard Ve) in salted area, the elastomer sleeve must be replaced by the heat-shrink collar.
DN
80 to 300
,
Protection of joints of pipes and fittings DN80 to 700
DN
80 to 700
Type
MPSM-C30-UNIV-300-DN150 to MPSM-C30-UNIV-300-DN80
Protection of joints of pipes and fittings DN150 to 2000
Type
HEPS-C30-24x100-RL to WPCP-IV-8x24K