Kit Universal Standard Ve TT PE Pipe + Universal Standard Ve Joint
Technical design
Technical design
Angular deflection
| 100 | C100 | 3 | 85 | SFB10N60AG-E02 |
| 125 | C64 | 3 | 63 | SFB12N60AG-E02 |
| 150 | C64 | 3 | 63 | SFB15N60AG-E02 |
| 200 | C64 | 3 | 63 | SFB20N60AG-E02 |
| 250 | C50 | 3 | 50 | SFB25N60AG-E02 |
| 300 | C50 | 3 | 41 | SFB30N60AG-E02 |
| 350 | C40 | 3 | 38 | SFB35N60AG-E02 |
| 400 | C40 | 3 | 35 | SFB40N60AG-E02 |
| 450 | C40 | 3 | 32 | SFB45N60AG-E02 |
| 500 | C40 | 3 | 30 | SFB50N60AG-E02 |
| 600 | C40 | 2 | 30 | SFB60N60AG-E02 |
| 700 | C30 | 2 | 27 | SFB70G70AG-E02 |
| 800 | C30 | 2 | 25 | SFB80G70AG-E02 |
| 900 | C30 | 1.5 | 25 | SFB90G70AG-E02 |
| 1000 | C30 | 1.2 | 25 | SFC10G70AG-E02 |
Features
- DN60 to 300 : Reference pipe + joint + Elastomer Sleeve
- DN350 to 700 : Reference pipe + joint + Heat-shrink Collar
- DN≥800 : Reference pipe + joint only. Don't forget to add roll of 30m Heat-shrink Collar and box of 25 Closing sleeve. Quantity to be determined depending on the project.
Documents
Documents
6 results
The STANDARD UNIVERSAL VE joint is the assembly of a standard push on joint and a standard universal anchoring ring with weld bead.
DN
80 to 1600
Type
Disassembling set to Wedge dismantling locking ring
The installation must be done in a clean and dry environment.
Necessary equipment to install the aluminium sleeve
- Aluminium adhesive tape width 75mm
- Tool (in wood) for the completions
- Gas-burner
Protection of joints of pipes and fittings DN60 to 300 for TT PE and TT PUX
Warning: in the case of pipes with anchored joints (Standard Vi, Universal Vi or Ve, Pamlock, Standard Ve) in salted area, the elastomer sleeve must be replaced by the heat-shrink collar.
DN
80 to 300
,
Protection of joints of pipes and fittings DN80 to 700
DN
80 to 700
Type
MPSM-C30-UNIV-300-DN150 to MPSM-C30-UNIV-300-DN80
Protection of joints of pipes and fittings DN150 to 2000
Type
HEPS-C30-24x100-RL to WPCP-IV-8x24K